Sony Laser Mech..Arcam

Rare Bird · 25th September 2008, 04:23 AM

Hi Folks
Does anyone recognise this Sony Mech, strangly there's no model number stamped on the plate!It's from an ARCAM 'CD62' which seems to be different to the other Diva CD players!

Thanks in advance..

Mooly · 25th September 2008, 08:10 AM

What's wrong with it ? What's the KSS number on the pickup. ?

Rare Bird · 25th September 2008, 01:04 PM

Hi Mooly
The lazer is the KSS 213 variant in which i have a new one. I need a new mech but unable to identify the unit number of the above.The mechs not a KSM 213CCM.used in the 'CD73' As this is he.

Mooly · 25th September 2008, 01:14 PM

Hi,
That's the one I've seen. What are you trying to fix ? You can swap motors etc over, or is the fault on the PCB.

Rare Bird · 25th September 2008, 01:22 PM

Hi Mooly

Yeh there a problem with it.Just best to swap the lot really

I'm puzzled why Sony have not printed the unit number on the chassis!

Mooly · 25th September 2008, 01:35 PM

Dunno where you will get one. Think I can see a Sony Pt No on the PCB. Going to be expensive

I bet.

Mooly · 25th September 2008, 01:43 PM

Have you fitted a new laser and it doesn't work ? Is there a shorting link ( solder blob ) on these to be removed first ? Just a thought

25th September 2008, 04:23 AM	#1
Rare Bird diyAudio Member Join Date: Sep 2008	Sony Laser Mech..Arcam Hi Folks Does anyone recognise this Sony Mech, strangly there's no model number stamped on the plate!It's from an ARCAM 'CD62' which seems to be different to the other Diva CD players! Thanks in advance..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacing Sony KSS-240a laser in Arcam alpha 7 CD	kora	Digital Source	74	8th February 2012 11:02 PM
new Brand of Hologram Laser (LDGU) LT0H30PA inside by Philips CDM12 and VAM12 mech	tiefbassuebertr	Digital Source	30	1st September 2011 05:47 PM
Help re laser and mech Rotel cd971	HCB	Digital Source	13	22nd September 2007 08:04 AM
Which Sony Laser For Arcam MCD	Thomo	Digital Source	3	12th September 2007 02:51 PM
New mech required for Arcam Alpha 8SE	tankertop	Digital Source	1	7th November 2005 09:14 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th September 2008, 08:10 AM	#2
Mooly diyAudio Member Join Date: Sep 2007	What's wrong with it ? What's the KSS number on the pickup. ?

25th September 2008, 01:04 PM	#3
Rare Bird diyAudio Member Join Date: Sep 2008	Hi Mooly The lazer is the KSS 213 variant in which i have a new one. I need a new mech but unable to identify the unit number of the above.The mechs not a KSM 213CCM.used in the 'CD73' As this is he.

25th September 2008, 01:14 PM	#4
Mooly diyAudio Member Join Date: Sep 2007	Hi, That's the one I've seen. What are you trying to fix ? You can swap motors etc over, or is the fault on the PCB.

25th September 2008, 01:22 PM	#5
Rare Bird diyAudio Member Join Date: Sep 2008	Hi Mooly Yeh there a problem with it.Just best to swap the lot really I'm puzzled why Sony have not printed the unit number on the chassis!

25th September 2008, 01:35 PM	#6
Mooly diyAudio Member Join Date: Sep 2007	Dunno where you will get one. Think I can see a Sony Pt No on the PCB. Going to be expensive I bet.

25th September 2008, 01:43 PM	#7
Mooly diyAudio Member Join Date: Sep 2007	Have you fitted a new laser and it doesn't work ? Is there a shorting link ( solder blob ) on these to be removed first ? Just a thought

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)