NAD T571 dead

ChocoHolic · 10th September 2008, 06:08 PM

...somehow this is the period of defekt equipments in my home

Newest headache is my NAD T571.

Error description:
Power LED always green.
Player does ignore all signal from the remote control and from the front panel as well.

Already checked:
-Mains fuse OK.
All output voltages of the SMPS OK.
-Connectors and wires between mainboard and front panel Ok.
-IR Remote IC ...at least not shorted...
-All front panel switches Ok
-Display slightly blackened (also tried if disconnecting the display supplies would let work the rest again- but no change in behavior.
-uCControler supply on the main board Ok.
-Hidden SMD fuses broken? No....

Hm... do you know this error?
Do you have a service manual?
In fact I am not willing to spend much time and/or money for the repair (may be 30-50 EUR and 2 more hours).
Simply exchanging the front panel PCB 6870R4935AN would be my first idea, but even for NAD service this would need several weeks and cost quite probable more than 50EUR...
Anybody out there who has such a front panel board left over and is willing to sell? (But please only offer if you are sure that it is working.)

Bye
Markus

ChocoHolic · 10th September 2008, 06:20 PM

...in the meantime I completely disconnected the display, but this does change anything.
It seems not to be an issue of the diplay, even if one corner is slighty blackened.

10th September 2008, 06:08 PM	#1
ChocoHolic diyAudio Member Join Date: Dec 2003 Location: Munich	NAD T571 dead ...somehow this is the period of defekt equipments in my home Newest headache is my NAD T571. Error description: Power LED always green. Player does ignore all signal from the remote control and from the front panel as well. Already checked: -Mains fuse OK. All output voltages of the SMPS OK. -Connectors and wires between mainboard and front panel Ok. -IR Remote IC ...at least not shorted... -All front panel switches Ok -Display slightly blackened (also tried if disconnecting the display supplies would let work the rest again- but no change in behavior. -uCControler supply on the main board Ok. -Hidden SMD fuses broken? No.... Hm... do you know this error? Do you have a service manual? In fact I am not willing to spend much time and/or money for the repair (may be 30-50 EUR and 2 more hours). Simply exchanging the front panel PCB 6870R4935AN would be my first idea, but even for NAD service this would need several weeks and cost quite probable more than 50EUR... Anybody out there who has such a front panel board left over and is willing to sell? (But please only offer if you are sure that it is working.) Bye Markus

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dead AKG P 8E with X 8S R	Bernhard	Analogue Source	10	2nd April 2008 10:55 AM
dead amp	ddoyle	Chip Amps	20	30th July 2007 01:30 AM
Dead Amp??	Shim	Solid State	12	5th June 2007 04:00 PM
Nak mb-70 dead ?	MadMutt	Car Audio	10	5th April 2007 03:18 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th September 2008, 06:20 PM	#2
ChocoHolic diyAudio Member Join Date: Dec 2003 Location: Munich	...in the meantime I completely disconnected the display, but this does change anything. It seems not to be an issue of the diplay, even if one corner is slighty blackened.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)