Searching for Philips schematics

[Cobra2]

Hi!

I'm looking for schematics for Philips DC-players:
"CD-610" and "AK-630".

Arne K

 

[guido]

Got 650, CDM2 + 7210/7220/tda1541. Anywhere near to the 610?

Guido

 

[Cobra2]

Re: Philips...

Both models have CDM4.19 transports...
(CD-610 have the SAA7220, hav not opened the other yet.)
Bought them at the local sec.hand shop for ca. $ 35 each, just for their transport (working perfect).
Will "hot-rod" them & find/make a new chassi.

Arne K

 

[Audiofanatic]

Hi!

I'm looking for schematics for Philips DC-players:
"CD-610" and "AK-630".

Arne K

Hi Cobra2,

I have the schematic of the CD630, the AK-630 is new to me!
If you meant the cd-630, you'll have to wait till I scan the schematics, then I'll send it to you!

Regards,

Audiofanatic

 

[Cobra2]

Re: Philips...

It says AK-630 on the front, cannot check further yet, as a friend has is on loan.
The CD-610 pcb (and chassi-construction) looked fairly similar to Marantz CD50...

Arne K

 

[stefanobilliani]

Re: Re: Searching for Philips schematics

I have the schematic of the CD630,

Audiofanatic

Hallo Audiofanatic

Did you find out if the CD630 Philips has an I2S (non oversampling) signal in?

 

[Audiofanatic]

Re: Re: Re: Searching for Philips schematics

Hallo Audiofanatic

Did you find out if the CD630 Philips has an I2S (non oversampling) signal in?

Hi Stefano,

Not yet! I'm not sure where to look and/or what the pins are.
I'll try to scan the schematics a.s.a.p. I'm still without a scanner.
Please be patient. If I don't have one by the end of this month, I'll send the schematic's to one of the dutch guy's to scan them for you guys.

Regards,

Audiofanatic

 

[guido]

Just have a look inside...

If there is a SAA7210 and SAA7220 in there, then between them there is I2S without oversampling (that's after the 7220).

SAA7210 might be 7310 in later models, same thing.
If it is more modern stuff, then it depends on the chips.

Just mention what is in there, the schematics are then 'text book' implementation in that area.

GuidoB

 

[Audiofanatic]

Just have a look inside...

If there is a SAA7210 and SAA7220 in there, then between them there is I2S without oversampling (that's after the 7220).

SAA7210 might be 7310 in later models, same thing.
If it is more modern stuff, then it depends on the chips.

Just mention what is in there, the schematics are then 'text book' implementation in that area.

GuidoB

Hi Guido,

Thanks for your help, you'r so right!
The 7310 is used and the SAA7220 DAC is the TDA 1541.

I'll post more info. if you need to know more.

Best regards,

Audiofanatic

 

[stefanobilliani]

Thanks Guys!

 

[Audiofanatic]

Thanks Guys!

It was my pleasure, all the best, thanks to you too Guido!

Audiofanatic

 

[stefanobilliani]

This links are what we need, see:

...to start

and

more

 

[mdlover]

Hi All,

I have the CD630 too. However, the player start to skip when cold start. I can hear the disc clamp spining sound when I was close to the player. Playing will be fine after it has warm up for more than 30 min. Any idea?

Audiofanatic,

May I have the schematic also when it's available?

Thanks in advance!

Cheers

 

[Audiofanatic]

May I have the schematic also when it's available?

Mdlover,

The minute I have them scaned, you'll have it !

I'll do my best.

Audiofanatic

 

[mdlover]

Thanks Audiofanatic!

 

[purer]

I need Philips schematics,too.

Thanks Audiofanatic

My E-mail ycljx_yjb@21cn.net

 

[Zombie]

Hello!
I have a CD615 and I've been looking for the schematic, too. I would be very happy if I could get the schematics for 610 and 630 from you guys.
Cheers,
Tom

 

[Valery]

Schematic of the CD630

Hello!
I have Philips CD630 (TDA1541A+SAA7220P/B inside). Please, send me the schematic too!

Thanks in advance!
Valery.

 

[stefanobilliani]

Audiofanatic can you send me the schematic of the 630?

Thanks very much !

 

[Peng]

cd850MKII

Now that everybody is digging up philips schematics, anybody out there has schematics of the cd-850mkII ?