TEAC VRDS-10 part values

Bob_Sled · 22nd May 2008, 08:57 PM

I found a TEAC VRDS 10 in the dumpster where I live. I hooked it up briefly by analog to a T-amp and it seemed to work OK. I opened it up to see what power caps and op-amps I could replace and found that R101 and Z101 were toasted.
Does anyone have the values of these parts and perhaps know what made them burn?

Any help Greatly appreciated!

- Jim

stephensank · 22nd May 2008, 11:09 PM

Don't have the schematics to it, but I am virtually dead certain that R101 will be a high value(4.7-10meg) power line neutral grounding resistor & Z101 will be a spike protection MOV. They would have been fried by a lightning surge on the power line that went through to ground. Probably got pitched because the previous owner's homeowner's insurance likely paid for some new junk, presuming the player & other etc. to be toast. Lucky score.

Cobra2 · 22nd May 2008, 11:36 PM

R101 = 220 ohm
Z101 = 5,1V Zener diode

Arne K

Bob_Sled · 23rd May 2008, 02:26 AM

Thank you gentlemen for your responses.

Cobra2, thanks for the exact values.

I am now one Very happy camper

I'll put the parts in tonight.

Bob_Sled · 26th May 2008, 10:53 PM

I had to replace the belts. Now It works like a charm.
Thanks again.

- Jim

22nd May 2008, 08:57 PM	#1
Bob_Sled diyAudio Member Join Date: Jul 2005 Location: Canada	TEAC VRDS-10 part values I found a TEAC VRDS 10 in the dumpster where I live. I hooked it up briefly by analog to a T-amp and it seemed to work OK. I opened it up to see what power caps and op-amps I could replace and found that R101 and Z101 were toasted. Does anyone have the values of these parts and perhaps know what made them burn? Any help Greatly appreciated! - Jim

22nd May 2008, 11:36 PM	#3
Cobra2 DIY ! diyAudio Member Join Date: Apr 2002 Location: Stavanger, Norway	VRDS-10 R101 = 220 ohm Z101 = 5,1V Zener diode Arne K __________________ Ars longa, vita brevis

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
F.S.: Teac VRDS-10 (SE)	Cobra2	Swap Meet	5	14th November 2011 07:28 AM
TEAC VRDS-10 vs VRDS 25X	Pani	Digital Source	12	3rd April 2011 04:03 AM
Help please with Teac VRDS-T1	georgehifi	Digital Source	0	14th February 2006 02:40 AM
TEAC VRDS-10 .. need help !	picodelle	Digital Source	2	7th November 2005 10:21 PM
Teac VRDS-10 vs 10-SE	Cobra2	Digital Source	0	17th December 2004 08:54 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd May 2008, 11:09 PM	#2
stephensank diyAudio Member Join Date: Oct 2006	Don't have the schematics to it, but I am virtually dead certain that R101 will be a high value(4.7-10meg) power line neutral grounding resistor & Z101 will be a spike protection MOV. They would have been fried by a lightning surge on the power line that went through to ground. Probably got pitched because the previous owner's homeowner's insurance likely paid for some new junk, presuming the player & other etc. to be toast. Lucky score.

23rd May 2008, 02:26 AM	#4
Bob_Sled diyAudio Member Join Date: Jul 2005 Location: Canada	Thank you gentlemen for your responses. Cobra2, thanks for the exact values. I am now one Very happy camper I'll put the parts in tonight.

26th May 2008, 10:53 PM	#5
Bob_Sled diyAudio Member Join Date: Jul 2005 Location: Canada	I had to replace the belts. Now It works like a charm. Thanks again. - Jim

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)