please help me on digital decoder/splitter

JinMTVT · 3rd April 2008, 04:38 PM

i've been searching for an already built standalone digital sound decoder that would let me setup my next HT as i want it to ( use multiples DCX as xovers and dacs )

I haven't found any chip solution for decoding surround sound digital formats ..is there any good solution out there ? id like my system to be able to accept different signals up to the most recent ones if possible

and then decode and split into the different channels
and output seperate digital signals

anyone has work on this kind of project?

the path i'd like to take for my audio setup :

source ( PC, PS3 blabla ) -> digital output ->
custom or pro decoder - > channel assign - > split ->
DCX ( Xovers + some para) ->analogue output to amps

my setup will be :

2 front loudpseakers with 2 channels each
1 front wall of subs

2 side surrounds same as fronts
1 rear center same as fronts/sides

so that is 11 channels of signal

please let me knwo if you guys have any indsight on a product or something i could diy with some help

anything will be very appreciate, since i am still at zero point right now

JinMTVT · 4th April 2008, 01:35 AM

http://focus.ti.com/apps/docs/gencon...=14817&appId=1

that seems pretty interesting now

http://focus.ti.com/apps/docs/mrktge...=14700&appId=1

it doesn't seem available yet..
what does manufacturers of AVRs use right now for working with DTS-HD and such ?

3rd April 2008, 04:38 PM	#1
JinMTVT diyAudio Member Join Date: Jul 2004 Location: MTL	please help me on digital decoder/splitter i've been searching for an already built standalone digital sound decoder that would let me setup my next HT as i want it to ( use multiples DCX as xovers and dacs ) I haven't found any chip solution for decoding surround sound digital formats ..is there any good solution out there ? id like my system to be able to accept different signals up to the most recent ones if possible and then decode and split into the different channels and output seperate digital signals anyone has work on this kind of project? the path i'd like to take for my audio setup : source ( PC, PS3 blabla ) -> digital output -> custom or pro decoder - > channel assign - > split -> DCX ( Xovers + some para) ->analogue output to amps my setup will be : 2 front loudpseakers with 2 channels each 1 front wall of subs 2 side surrounds same as fronts 1 rear center same as fronts/sides so that is 11 channels of signal please let me knwo if you guys have any indsight on a product or something i could diy with some help anything will be very appreciate, since i am still at zero point right now

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
With a 5.1 sound card, do I still need a Dolby Digital decoder?	JCoffey	Digital Source	14	30th April 2004 02:10 PM
Not enough Digital audio inputs, can I use a splitter?	Snootleather	Digital Source	2	27th November 2003 10:32 AM
Dolby Digital / DTS decoder DIY link	nFORCE	Digital Source	6	22nd September 2003 04:19 PM
DIY Digital Optical Out Decoder	ajhawkins	Digital Source	7	30th August 2002 09:30 PM
Standalone Dolby Digital & DTS Decoder	Neopsp	Everything Else	2	3rd May 2002 11:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th April 2008, 01:35 AM	#2
JinMTVT diyAudio Member Join Date: Jul 2004 Location: MTL	http://focus.ti.com/apps/docs/gencon...=14817&appId=1 that seems pretty interesting now http://focus.ti.com/apps/docs/mrktge...=14700&appId=1 it doesn't seem available yet.. what does manufacturers of AVRs use right now for working with DTS-HD and such ?