diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   Finally, an affordable CD Transport: the Shigaclone story (http://www.diyaudio.com/forums/digital-source/120229-finally-affordable-cd-transport-shigaclone-story.html)

Peter Daniel 27th March 2008 04:50 PM

When suspending mechanism from the bottom, using two spacers like this worked better than direct mount:

http://www.audiostereo.pl/zalaczniki/950603_2.jpg

kevinkr 27th March 2008 04:56 PM

Tried Best Buy online, unfortunately they no longer carry this model.
I'll probably risk some low end units on eBay and see what I can come up with.

I found one I can buy for about $80 which is far more than I want to spend. Yeah I'm cheap.. ;)

Peter Daniel 27th March 2008 05:02 PM

2 Attachment(s)
Now, the clock. I tried Tent clock with a dedicated PS, but it didn't worked well. My findings has been quite similar what Romy says on his site:

http://www.goodsoundclub.com/Forums/...px?PostID=2171



http://www.audiostereo.pl/zalaczniki/939529_2.jpg

I later installed Citizen 300-8441 crystal from DK and this is what I use till now:

http://www.audiostereo.pl/zalaczniki/939530_1.jpg

steenoe 27th March 2008 05:05 PM

Quote:

Originally posted by kevinkr

I found one I can buy for about $80 which is far more than I want to spend. Yeah I'm cheap.. ;)

Ya must be kiddin' :D What is cheap?

Superb work Peter, as usual. The one that didnt work must have taken hours to make. Send it to me for proper disposal;)

:)

Peter Daniel 27th March 2008 05:15 PM

Beside all that, there are few components that I replaced on original board (replacing too many will kill the sonics).

I basicaly removed the main filter cap and replaced all other electrolytics tied directly to rails with BG N caps and also removed their SMD bypasses. One other cap was replaced to ERO 1830, 0.1uF and that's basically all. Okapi will post PDF when it's ready.

One other thing, the output resistors are quite important, I got the best results with Caddock MK132 75R to ground and VishayS102 60R (or similar value) in series.

http://www.audiostereo.pl/zalaczniki/982341_1.jpg
http://www.audiostereo.pl/zalaczniki/1042747_1.jpg

luvdunhill 27th March 2008 05:25 PM

any idea if and what flavor i2s might be available from the transport?

Peter Daniel 27th March 2008 05:32 PM

2 Attachment(s)
I'm afraid the I2S output is not available. Here's the underside of PCB.

Peter Daniel 27th March 2008 05:33 PM

2 Attachment(s)
And this is mechanism in all its glory;)

luvdunhill 27th March 2008 05:50 PM

Quote:

Originally posted by Peter Daniel
I'm afraid the I2S output is not available. Here's the underside of PCB.
what about pins 33-36 on the LC78620? I'm looking at the LC78620E datasheet, as I cannot make the exact number out from your photo. Looks to be i2s output.

Also, is the "B" designation important in the model?

d to the g 27th March 2008 06:04 PM

Quote:

Originally posted by luvdunhill


Also, is the "B" designation important in the model?

The first post doesn't mention the B, but the image of Peter's storage facility shows all B models. I'd like to know as well.


All times are GMT. The time now is 08:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2