Somebody was posting links on Polish forum, I'm sure you can get them locally as well:
http://www.tasmy-lasery.impelshop.com.pl/
http://www.czytniki.pl/cgibin/shop?show=31&sort=name&sid=75d082ea
http://www.czytniki.pl/cgibin/shop?show=32&sort=name&sid=75d082ea
http://www.tasmy-lasery.impelshop.com.pl/
http://www.czytniki.pl/cgibin/shop?show=31&sort=name&sid=75d082ea
http://www.czytniki.pl/cgibin/shop?show=32&sort=name&sid=75d082ea
Did you try:
http://stores.ebay.com/Liberty-Elec...colZ4QQdirZQ2d1QQfsubZ613606018QQftidZ2QQtZkm
They have the replacement optical pickups for this transport also.
http://stores.ebay.com/Liberty-Elec...colZ4QQdirZQ2d1QQfsubZ613606018QQftidZ2QQtZkm
They have the replacement optical pickups for this transport also.
Thanks Peter but I do not speak polish...otherwise I would have ordered the longest ribbon....say 40/50 cm or longer
I have contacted loads of dutch shops...they all confirmed they had them in the past but carry them no longer...
Hayenc I will check out which one I will need maybe I can order
although I hate e-bay to many bad experiences..
What means pitch or better do I need 1.00 mm or 1.25 mm
16 pins
Anyway thanks both in advance...
I have contacted loads of dutch shops...they all confirmed they had them in the past but carry them no longer...
Hayenc I will check out which one I will need maybe I can order
although I hate e-bay to many bad experiences..
What means pitch or better do I need 1.00 mm or 1.25 mm
16 pins
Anyway thanks both in advance...
For anyone how is interested.
[http://www.toby.co.uk/content/catalogue/products.asp?series=AXO-xxxxx]
Partnr: AXO-00525
FFC1.00A18-0290L5.0-5.0-10.0-10.0SBBB
1.00mm: Pitch:
A: Stripped at both ends on two
sides with reinforcements on the
same side
18: Number of conductors (N)
0290 Insulated length in mm = L
L Type of tape (standard)
5.0 Strip length in mm (S1)-End 1
(standard)
5.0 Strip length in mm (S2)-End 2
(standard)
10.0 Reinforcement length in mm (F1) -
End 1 (standard)
10.0 Reinforcement length in mm (F2) -
End 2 (standard)
S Conductor thickness: S (standard)
B Standard marking: with UL STYLE
2896 and AXON’ logo
B End 1
B End 2
[http://www.toby.co.uk/content/catalogue/products.asp?series=AXO-xxxxx]
Partnr: AXO-00525
FFC1.00A18-0290L5.0-5.0-10.0-10.0SBBB
1.00mm: Pitch:
A: Stripped at both ends on two
sides with reinforcements on the
same side
18: Number of conductors (N)
0290 Insulated length in mm = L
L Type of tape (standard)
5.0 Strip length in mm (S1)-End 1
(standard)
5.0 Strip length in mm (S2)-End 2
(standard)
10.0 Reinforcement length in mm (F1) -
End 1 (standard)
10.0 Reinforcement length in mm (F2) -
End 2 (standard)
S Conductor thickness: S (standard)
B Standard marking: with UL STYLE
2896 and AXON’ logo
B End 1
B End 2
sparkle said:
yes - that information would be very nice to know...!!!
some battery and regulator after the battery....
Well, I’d describe the new sound as natural and “musical”/”voiced”, perhaps the best from my clone in these aspects, which are most important for me. Now when listening I do not think about bass, midds, highs, other things, there is no reason for that. As usually the best impression of naturalness can be heard on classical chamber music.
You can easily do similar exercise by supplying of LC/LA at PCB with 5V reg and small 9V battery (will be enough for a few hours of playing), by leaving the motors on 8V PSU. Just try, this costs nothing.
Very good brqds...
Yesterday I made a proper ribbon out of 3 ribbons in order to get a decent length with 1 mm pitch and 18 pins...(very difficult to order)....say 30 cm ++
Maybe a bit over the top clamping it with ebony but it works like a charm...you have to use 3 ribbons in order not to get inverted...
Yesterday I made a proper ribbon out of 3 ribbons in order to get a decent length with 1 mm pitch and 18 pins...(very difficult to order)....say 30 cm ++
Maybe a bit over the top clamping it with ebony but it works like a charm...you have to use 3 ribbons in order not to get inverted...
Attachments
