|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
15th March 2008, 07:59 PM
|
#1 |
|
diyAudio Member
Join Date: Nov 2003
Location: Near PARIS
|
"SPDIF" interface for CD/DVD drive ( PC)
   Hi , This is my first post on this forum. I have realized a CI for the CD/DVD drive with a SPDIF output . Have a look at the three fotos . The CD on the foto is an ASUS CD 520 and the CI is a "low cost" version. 7805 regulators . Standard oscillator, Standard capacitors. The 12v is connected on the CD connector . A best version would be : low noise regulator ( AUDIOCOM ....) TENT oscillator OSCON capacitors An independant 12 v A custom version .... You put what you want and what you have the CI is very large ....  If you have any questions ... Serge |
|
|
15th March 2008, 10:06 PM
|
#3 |
|
diyAudio Member
Join Date: Nov 2003
Location: Near PARIS
|
75 Ohms ?
You have different solutions on the CI . The RS 422 drivers has TX+ and TX- outputs so you can have a differential link . You can put a resistor between TX+ and TX - ( on the CI ) . I use only the TX + with a resistor connected to the GND .  On my DAC i have the same RS 422 Drivers .The shema is the same than this circuit ,The TX + and TX - outputs are directly connected to the CS 8414 Serge |
|
|
|
16th March 2008, 09:05 PM
|
#4 |
|
diyAudio Member
Join Date: Nov 2003
Location: Near PARIS
|
  The version with a TENT oscillator and super regulator AUDIOCOM version 1 Serge |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help with "Interface Electronics" portable audio mixer | Binaural | Analog Line Level | 8 | 1st April 2011 06:34 AM |
| "Gainclones" and current drive. | JoeBob | Chip Amps | 9 | 2nd November 2007 07:30 PM |
| DACs + SPDIF Out for a DAP (i.e. "mp3 player") | threpointone | Digital Source | 1 | 3rd July 2007 11:15 PM |
| How do I design "SCREEN GRID DRIVE" | ANALOG GUY | Tubes / Valves | 17 | 11th May 2006 11:39 PM |
| "direct connection" for spdif | Graz | Digital Source | 2 | 21st November 2004 06:35 AM |
| New To Site? | Need Help? |
| Page generated in 0.08333 seconds (74.45% PHP - 25.55% MySQL) with 10 queries |
