Marantz CD54 help !

Zaireeka · 26th February 2008, 05:38 PM

Hello,
When changing caps on my CD54 I accidentally ran the player with a short circuit on the -12V circuit.

I changed the fuse at the back of the player and on the supply PCB, and all the voltage are OK but the player doesn't work anymore.

When I turn it on the motor doesn't spin and the pickup arm goes in inner position and forces on this position. The laser is working, and I tested the spindle motor which is OK.

I already have the service manuals for the Marantz and the CDM-1, I think I fried a chip on the servo board (P201) or on the motor control (PM02) board but I can't figure out which one. I don't know how to check the chips to find the one which has failed.

Can someone give me clues to fix this player ? I'm also looking for spare PCB for this player, some chips it uses are very hard to find, and I really don't feel like trashing it...

Zaireeka · 27th February 2008, 11:18 AM

I've ordered new OPAs, think some of them died due to the faulty -12V on their supply pins.
Hope replacing them will work...

Zaireeka · 3rd March 2008, 10:21 AM

It works !

Replacing the four OPAs on the CDM1 boards did the job...

26th February 2008, 05:38 PM	#1
Zaireeka diyAudio Member Join Date: Aug 2004 Location: Bordeaux	Marantz CD54 help ! Hello, When changing caps on my CD54 I accidentally ran the player with a short circuit on the -12V circuit. I changed the fuse at the back of the player and on the supply PCB, and all the voltage are OK but the player doesn't work anymore. When I turn it on the motor doesn't spin and the pickup arm goes in inner position and forces on this position. The laser is working, and I tested the spindle motor which is OK. I already have the service manuals for the Marantz and the CDM-1, I think I fried a chip on the servo board (P201) or on the motor control (PM02) board but I can't figure out which one. I don't know how to check the chips to find the one which has failed. Can someone give me clues to fix this player ? I'm also looking for spare PCB for this player, some chips it uses are very hard to find, and I really don't feel like trashing it...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dac Marantz CDA 94	kva	Digital Source	9	21st March 2009 07:44 PM
Coxial Output for Marantz CD54	lscangus	Digital Source	3	29th July 2006 08:09 AM
Digital Ouput Mod for Marnatz CD54	lscangus	Digital Source	1	18th November 2005 03:34 PM
Right speakers for Marantz PM8000 + Marantz CD67-OSE?	betto80	Multi-Way	2	24th May 2005 03:21 PM
Link Between Marantz CD12 and Marantz CD99	Mesh	Digital Source	16	7th November 2003 06:08 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th February 2008, 11:18 AM	#2
Zaireeka diyAudio Member Join Date: Aug 2004 Location: Bordeaux	I've ordered new OPAs, think some of them died due to the faulty -12V on their supply pins. Hope replacing them will work...

3rd March 2008, 10:21 AM	#3
Zaireeka diyAudio Member Join Date: Aug 2004 Location: Bordeaux	It works ! Replacing the four OPAs on the CDM1 boards did the job...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)