NAD 5325 CD Tray won't stay shut

dman535 · 22nd February 2008, 02:41 PM

I know this is an older CD player, had it since new. The CD tray won't stay shut when its powered up. Popped the case, didn't see anything broken or ground off. Any ideas on where to start?

Thanks

Derek.-

Netlist · 22nd February 2008, 06:08 PM

Underneath the tray you will find a so called end-switch.
Most likely you will need to disassemble the tray. I had luck in the past with some contact spray but best is to replace it.

/Hugo

dman535 · 24th February 2008, 08:33 PM

The switch seemed to be tied to a rotary gear. I cleaned and tested the switch, made no difference. I even tried to ground out the connection manually and the cd tray didn't respond. Could possible be something a little bit more significant.

22nd February 2008, 02:41 PM	#1
dman535 diyAudio Member Join Date: Dec 2007	NAD 5325 CD Tray won't stay shut I know this is an older CD player, had it since new. The CD tray won't stay shut when its powered up. Popped the case, didn't see anything broken or ground off. Any ideas on where to start? Thanks Derek.-

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
stay-on switch	CommanderZero	Parts	0	17th June 2006 09:51 AM
Please Help - amp pop, shut down	bonz	Solid State	1	30th April 2005 11:08 PM
x-over makes my amp get hot and shut down	SimontY	Solid State	10	16th April 2004 04:00 PM
my nad 5325	yanamps	Digital Source	0	23rd September 2003 08:11 AM
building amp every one should stay tuned	jleaman	Everything Else	0	13th April 2001 05:45 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd February 2008, 06:08 PM	#2
Netlist diyAudio Moderator Join Date: Jan 2003	Underneath the tray you will find a so called end-switch. Most likely you will need to disassemble the tray. I had luck in the past with some contact spray but best is to replace it. /Hugo

24th February 2008, 08:33 PM	#3
dman535 diyAudio Member Join Date: Dec 2007	The switch seemed to be tied to a rotary gear. I cleaned and tested the switch, made no difference. I even tried to ground out the connection manually and the cd tray didn't respond. Could possible be something a little bit more significant.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)