diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   SPDIF and sound card question (http://www.diyaudio.com/forums/digital-source/116337-spdif-sound-card-question.html)

GestaltH 28th January 2008 04:13 PM

SPDIF and sound card question
 
Hi,

I am new to the whole DIY audio thing and have a few questions. I have a creative x-fi sound card with an SPDIF output. One question that I have is, does that output contain the signal for all 7.1 channels? Also, can it be made to work at 24 bit and 96khz with all channels? Does this output contain all of the processing that that the analog outputs would normally have (such as 24 bit crystallizer and such), or is it output before that point?

Thanks for any info.

pjp 28th January 2008 04:24 PM

http://en.wikipedia.org/wiki/S/PDIF#...specifications

http://en.wikipedia.org/wiki/AES/EBU#The_Protocol

GestaltH 28th January 2008 09:32 PM

Thanks for the links. I didn't think to look up AES/EBU for more information.

So, it seems like it is limited to 2 channels and is either 20 or 24 bit. Is there a way to get a digital output for all 7.1 channels from a sound card like this? It doesn't have to be SPDIF necessarily.

JinMTVT 30th January 2008 03:18 PM

and i thought that digital output from computer cars
could carry the surround info..

i am pretty sure that i have seen many times
text about output of multiple channel output from digital
sound cards ???

GestaltH 30th January 2008 07:25 PM

I guess what I really meant was that it doesn't carry any more than 2 channels of uncompressed PCM data. It looks like you can get 5.1 (is 7.1 possible?) pass through on a digital connection but that is still encoded as Dolby Digital or DTS if I am understanding what I have read correctly.

What I was looking for a was uncompressed audio. The only interface that I could find that I liked that could do that is MADI (32 channels at 96k). ADAT lightpipe can also carry 8 channels but only at 48k and I was hoping for 96 or 192. In any case, both of those interfaces are found only on high end equipment (that I have seen anyways) and I don't know how I would go about actually retrieving the individual channel data from the stream anyways.

I still haven't really found a solution to what I'm trying to do. I'll probably make a post later that explains what that is and see if anyone has any ideas about how to implement it. If 8 channels of PCM 96k were available directly from the sound card, it would make what I was trying to do a lot easier.

In the mean time, if anyone has any information on low cost computer cards that support MADI or 7.1 channel PCM over SPDIF or AES, I would appreciate any information. Also, any info on "DIY possible" Dolby Digital or DTS decoding would be nice as well as info on MADI transmit/receive ICs if any exist.

JinMTVT 30th January 2008 09:58 PM

ah!!
that is better..u were suddently ruining all my plans :p
aahahah

good luck finding the right product for u then :p

pjp 5th February 2008 04:23 AM

So what is it you were trying to do ? :)

GestaltH 5th February 2008 06:11 AM

I have made a much more detailed post of what I was thinking here:

http://www.diyaudio.com/forums/showt...hreadid=116779


All times are GMT. The time now is 05:28 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2