Marantz CD-23 - CDM-9Pro issues - help!

cleo7613 · 5th January 2008, 08:08 AM

Hi,

have a CD-23 player - always reliable - until today...

Porblem: spindle will only turn ~ 1/4 turn before sticking. Everything else working eg laser etc.

Tried forcing it - delicately... which freed it up enough to spin but now accompanied by constant light grating noise!

After a bit more fiddling, managed to return it to its intial state - stuck after 1/4 turn.

I've just joined the forum - typical, yes, when you need help... too new a member to email directly to members - but search of the archive revealed posting by:

'Dowser'

He had some issues with his CDM-9Pro drive - if you are reading or if someone can forward him my thread - I'd be very grateful - perhaps you can shed some light on the problem?

Otherwise, if anyone else has some familiarity with this drive, your help is much appreciated:

I'm aware that there is a magnet situated on the underside of the spindle? - could this have dislodged and is causing the binding? Or is there another part - washer? seal? - that is sandwiched between the spindle and the plate?

Should I attempt to prise off the spindle?!!

Apologies for the lack of pith to this thread - a bit of a long read... thanks for coming this far!

with best regards

Carl

cleo7613 · 5th January 2008, 09:36 AM

...prise off spindle platter...

eledora · 22nd February 2008, 10:38 AM

Do you still need the CDM9? we have little new and original one in stock, but it is very exensive, 250 euro/pc, only the optical pickup.350 euro/pc with machine
and the second hand one is very cheap, but it is only test ok.
Please contact me if you need any other help

5th January 2008, 08:08 AM	#1
cleo7613 diyAudio Member Join Date: Jan 2008	Marantz CD-23 - CDM-9Pro issues - help! Hi, have a CD-23 player - always reliable - until today... Porblem: spindle will only turn ~ 1/4 turn before sticking. Everything else working eg laser etc. Tried forcing it - delicately... which freed it up enough to spin but now accompanied by constant light grating noise! After a bit more fiddling, managed to return it to its intial state - stuck after 1/4 turn. I've just joined the forum - typical, yes, when you need help... too new a member to email directly to members - but search of the archive revealed posting by: 'Dowser' He had some issues with his CDM-9Pro drive - if you are reading or if someone can forward him my thread - I'd be very grateful - perhaps you can shed some light on the problem? Otherwise, if anyone else has some familiarity with this drive, your help is much appreciated: I'm aware that there is a magnet situated on the underside of the spindle? - could this have dislodged and is causing the binding? Or is there another part - washer? seal? - that is sandwiched between the spindle and the plate? Should I attempt to prise off the spindle?!! Apologies for the lack of pith to this thread - a bit of a long read... thanks for coming this far! with best regards Carl

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Marantz CD16 drawer issues	Sarion	Digital Source	3	21st July 2008 08:04 PM
HELP: NEED A philips cdm-9pro	HENRYC	Digital Source	1	16th November 2005 07:11 PM
Right speakers for Marantz PM8000 + Marantz CD67-OSE?	betto80	Multi-Way	2	24th May 2005 03:21 PM
Marantz CD72 Tray issues	Duncan	Digital Source	5	11th December 2004 12:48 PM
Datasheet on CDM 9pro	Alvinttt	Digital Source	0	21st October 2003 03:32 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th January 2008, 09:36 AM	#2
cleo7613 diyAudio Member Join Date: Jan 2008	...prise off spindle platter...

22nd February 2008, 10:38 AM	#3
eledora diyAudio Member Join Date: Aug 2007	Do you still need the CDM9? we have little new and original one in stock, but it is very exensive, 250 euro/pc, only the optical pickup.350 euro/pc with machine and the second hand one is very cheap, but it is only test ok. Please contact me if you need any other help

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)