Modding NAD C542 running into problems... - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th December 2007, 04:06 PM   #1
diyAudio Member
 
Join Date: Dec 2007
Default Modding NAD C542 running into problems...

Hi, I'm new to this forum, and I'm hoping to get some help from you guys.

I came upon a thread in this forum where some people were very enthusiastic about modifying the Nad c542 cd-player. As I have some experience with DIY having built my own speakers and a gainclone, I thought I would give it a shot!
Initially everything worked well and I got significant improvements removing the muting transistors and replacing the DC-blockers in the output section with MKP-type capacitors. I went on to replacing some of the transistors in the output section and some filtering caps in the power supply with Black gates. This also worked very well.
But when I moved on to replacing some caps around the DAC-chip and reinstalling, in the power supply, some of the Nichicon fine golds that had been pulled out from the output section, I ran into problems...
When I turned the CD-player on it played for a minute or so and then one channel just died. Since just one channel were affected I thought the problem must be in the analog section. Probably due to a capacitor somehow malfunctioning when it got warm. Would this reasoning be correct?
I should mention that some of the capacitors i put in were lover voltage rating then the ones pulled out. This was because when I ordered the capacitors I was looking at the service manual, and here some caps vere 16v, that turned out to be 50v in the actual player... So I pulled these out again and put the original caps back in. The problem remained just the same.
Since then I have been trying a lot of things, gradually turning the player back to what it was before it started malfunctioning, but instead of getting better, the player has been getting worse! Now there is noise in one channel and both channels are going on and off it seems. I dont want to mess any more with it before asking you guys what you think. Does this sound like bad capacitors to you, or might I have inflicted more serious damage to the chips or something like that? Of course I have tried putting most of the original capacitors back, but I can not trust them completely since they might have been damaged while being desoldered.

I would be so grateful if anyone could help me out here...
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Extreme OB, & Problems in Running The Edge CLS Full Range 4 13th April 2009 03:38 AM
What advantages running ported midbass if you are running a sub? mitchyz250f Multi-Way 3 20th May 2008 02:34 PM
Nad C542 Upgrade/mod FSHZ:42 Digital Source 0 11th March 2008 09:23 AM
NAD C542 Service Manual wanted meldano Solid State 1 17th July 2006 10:14 AM
Nad C521 & C542 arupg Digital Source 0 22nd December 2005 05:24 AM


New To Site? Need Help?

All times are GMT. The time now is 04:53 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2