Philips cdm 9 pro replace?

serraniruben · 13th November 2007, 08:11 PM

Hi all,
I read a topic reffered to the philips cdm 9 pro mechanics in the forum Broken CDM9 Transport
and need contact with ohynot (because they have units for sale), anyone have the mail, I can read the link.
Others users have spare philips cdm 9 pro mechanics links or where can find one.
Thanks for your time!
Rubén

MJW · 14th November 2007, 10:19 AM

Well I think you are going to struggle with this transport I'm afraid.
It's very rare. Like looking for a Studer/Philips CDM3.
On a bright note however I'm sure I recall the plain CDM9 as being interchangeable with the PRO mech, so provided it's just the lazer diode that has expired you can just swap them over.

If you go to Ebay and do a search for CDM9 you should find a number of sellers of brand new mech's. Around £30-40 give or take a few escudos.

Actually as I'm not 100% certain about the interchangeability get in touch with Jean-paul, a member here.
He knows lots of definitive information about this stuff and I think he actually has a number of stashes of different transport mechanisms, aside from loads of other stuff no doubt. Ha ha....
He will know. Best of luck. Matt.

serraniruben · 14th November 2007, 04:54 PM

Ok Matt,
Thanks for your info!
Rubén

atarashi · 14th November 2007, 05:26 PM

Hi Rubén,

which Part of the CDM9Pro do you need?

brgds
Michael

serraniruben · 14th November 2007, 08:55 PM

Hi,
I need the motor.
Thanks!
Rubén

serraniruben · 14th November 2007, 10:26 PM

Hiall,
Anyone know if the motor in the CDM 4 is the same that the CDM 9 (hall brushless)
Thanks!
Rubén

atarashi · 15th November 2007, 12:58 PM

Hi Rubén,

well, Schnepel in Germany still has a few of these:
http://www.ersatzteil.justone-schnep...44_cdm944.html

not cheap, but so are the CDM9Pro based drives ;-)

brgds
Michael

serraniruben · 15th November 2007, 06:00 PM

Hi Michael,
In your link the mechanics is the 9/44 , I need the pro version, but send a mail to know if still have in stock this mechanics
Thanks!
Rubén

atarashi · 16th November 2007, 10:49 AM

Hi Rubén,

well, they state on their site, that they are compatible...

hope it works out fine! (keep your cdm9pro alive!)

brgds
Michael

dtektoni · 15th January 2008, 08:41 AM

Hi All,
Is there anybody know where in Philips CD players CDM9 PRO is used? I'm looking for brushless motor schematics.
Regards Dmitry

13th November 2007, 08:11 PM	#1
serraniruben diyAudio Member Join Date: Oct 2004	Philips cdm 9 pro replace? Hi all, I read a topic reffered to the philips cdm 9 pro mechanics in the forum Broken CDM9 Transport and need contact with ohynot (because they have units for sale), anyone have the mail, I can read the link. Others users have spare philips cdm 9 pro mechanics links or where can find one. Thanks for your time! Rubén

14th November 2007, 10:19 AM	#2
MJW diyAudio Member Join Date: Aug 2006	CDM9 pro Well I think you are going to struggle with this transport I'm afraid. It's very rare. Like looking for a Studer/Philips CDM3. On a bright note however I'm sure I recall the plain CDM9 as being interchangeable with the PRO mech, so provided it's just the lazer diode that has expired you can just swap them over. If you go to Ebay and do a search for CDM9 you should find a number of sellers of brand new mech's. Around £30-40 give or take a few escudos. Actually as I'm not 100% certain about the interchangeability get in touch with Jean-paul, a member here. He knows lots of definitive information about this stuff and I think he actually has a number of stashes of different transport mechanisms, aside from loads of other stuff no doubt. Ha ha.... He will know. Best of luck. Matt.

15th January 2008, 08:41 AM	#10
dtektoni diyAudio Member Join Date: Jan 2005 Location: Tel Aviv	Hi All, Is there anybody know where in Philips CD players CDM9 PRO is used? I'm looking for brushless motor schematics. Regards Dmitry __________________ Sincerely Dmitry

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS Alnico Philips AD3800M AD3800AM and Philips transformers	guglielmope	Swap Meet	8	10th January 2011 12:28 PM
replace 75339p with philips psmn 015-100p	papaspanky	Solid State	1	23rd February 2009 02:22 PM
philips cd 880 philips cd880 service manual	0519	Digital Source	4	28th August 2008 12:43 PM
replace DAC	maxpou	Digital Source	13	21st February 2008 06:51 PM
Replace opamps in Philips 963SA sacd player	Ed Fallon	Digital Source	0	11th April 2003 05:00 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th November 2007, 04:54 PM	#3
serraniruben diyAudio Member Join Date: Oct 2004	Ok Matt, Thanks for your info! Rubén

14th November 2007, 05:26 PM	#4
atarashi diyAudio Member Join Date: Jun 2005 Location: Vienna	Hi Rubén, which Part of the CDM9Pro do you need? brgds Michael

14th November 2007, 08:55 PM	#5
serraniruben diyAudio Member Join Date: Oct 2004	Hi, I need the motor. Thanks! Rubén

14th November 2007, 10:26 PM	#6
serraniruben diyAudio Member Join Date: Oct 2004	Hiall, Anyone know if the motor in the CDM 4 is the same that the CDM 9 (hall brushless) Thanks! Rubén

15th November 2007, 12:58 PM	#7
atarashi diyAudio Member Join Date: Jun 2005 Location: Vienna	Hi Rubén, well, Schnepel in Germany still has a few of these: http://www.ersatzteil.justone-schnep...44_cdm944.html not cheap, but so are the CDM9Pro based drives ;-) brgds Michael

15th November 2007, 06:00 PM	#8
serraniruben diyAudio Member Join Date: Oct 2004	Hi Michael, In your link the mechanics is the 9/44 , I need the pro version, but send a mail to know if still have in stock this mechanics Thanks! Rubén

16th November 2007, 10:49 AM	#9
atarashi diyAudio Member Join Date: Jun 2005 Location: Vienna	Hi Rubén, well, they state on their site, that they are compatible... hope it works out fine! (keep your cdm9pro alive!) brgds Michael

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read