diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   I2S from CD Rom using TC9474FA DSP (http://www.diyaudio.com/forums/digital-source/111806-i2s-cd-rom-using-tc9474fa-dsp.html)

honinbou 12th November 2007 07:02 PM

I2S from CD Rom using TC9474FA DSP
 
I was going to throw away my Aopen CD-Rom but changed my mind when a friend told me that I could build a CD transport from this thing.

The model is CD-948E. It has a Toshiba DSP TC9474FA, and I was told that it has I2S outputs.

According to the Samsung SC-184B CD Rom drive schematics the TC9474FA has the following taps

pin 74: CHCK --> DLRCK
pin 50: ABCK --> DBCLK
pin 49: ADO --> DSDATA
pin 81: LRCK--> LRCK
pin 82: DAI--> SDATA
pin 83: BCKI --> BCK

Now the problem. I don't know which set is audio I2S. I am planning going to connect a TDA1543 to the the TC9474FA. Should I connect 1543's BCK,WS, and DATA to pins 74/50/49 or pins 81/82/83 of the 9474?


All times are GMT. The time now is 05:22 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2