Looking for Laser Unit for Kenwood DP-X9010

[dimon68]

What matters is what works.

[alfredrofe]

Originally Posted by opteron

Some time ago I was made succesfully replace original DLBA... for SOHOT3 (KSS152) in DP-X9010. Maybe is not pretty done but works dam good.

I am trying to replace the laser on a kenwood DPX9010 which has a DLBA, I have sourced a KSS152A and wonder if you have the pin outs on the laser head, there are 8 pins on a red plug and a white plug each, you tray looks different tp mine, also did you have to line the laser up or did it just drop into place, is there any stress on the magnetic travel using the wire you used ?, you may email me direct on "alfredrofe@optusnet.com.au"

[littlerick]

I have a Sharp laser unit numbers on unit are....

RCTRH0053AF 21A91200088 BI0 56.0ma BIP0.482ma

If its what your after PM me. Its brand new in box.

[opteron]

Originally Posted by alfredrofe

I am trying to replace the laser on a kenwood DPX9010 which has a DLBA, I have sourced a KSS152A and wonder if you have the pin outs on the laser head, there are 8 pins on a red plug and a white plug each, you tray looks different tp mine, also did you have to line the laser up or did it just drop into place, is there any stress on the magnetic travel using the wire you used ?, you may email me direct on "alfredrofe@optusnet.com.au"

There are two types of KSS152 (one of those can't be used), pinouts i was used from some onkyo player datasheet with KSS152 and the same servo chip as kenwood. The wires was very light (take from PC mouse) and make minimum stress but still it was some. This caused produce some heat on coils but it works to present day. Nothing burned. Also you can use original tape from DLBA laser instead many wires. If you want to sell that player as it is, please let me know.

[meda3472]

Looking for Kenwood DPX9010 CD transport Remote Replacement!Any one suggest witch replacement to look for original or what will be original remote number!Thanks meda3472!

[dimon68]

At last came the turn of the KSS-271A (SONY CDP-X333ES), donor's KSS-183A. RF amplifier is built on CXA1081M. In the photo a temporary draft, then of course I will do everything beautifully. Everything works fine!

[living]

Originally Posted by dimon68

At last came the turn of the KSS-271A (SONY CDP-X333ES), donor's KSS-183A. RF amplifier is built on CXA1081M. In the photo a temporary draft, then of course I will do everything beautifully. Everything works fine!

nice job！