diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   USB to XLR kits? (http://www.diyaudio.com/forums/digital-source/106255-usb-xlr-kits.html)

tommas 2nd August 2007 02:10 PM

USB to XLR kits?
 
I want to find a simple, clean solution to get music from my itunes server (an old powerbook) to my speakers (which take XLR only).

I was looking for something in a kit (I just recently made a 303-clone from a kit and had a fun time doing so), something to go from USB to balanced XLR.

Are there any kits like that? I've searched this forum and a few others but kits seem to be either USB to unbalanced or optical to balanced.

Thanks!

pinkmouse 2nd August 2007 02:12 PM

Have a look at this one.

dangus 4th August 2007 01:45 AM

I have something like that:
ADS Tech "Instant Music" USB <-> RCA analog / Toslink S/PDIF; bits and rate is limited to something like 16/48.
Behringer SRC-2496 ADC/DAC/SRC with XLR ins and outs, up to 24/96.
Total cost about $200. I expect the Behringer could benefit from a modded power supply, but as-is it hopefully outperforms most internal sound cards, and gives me galvanic isolation.

Or you could just wire up XLR - RCA cables; if your speakers have XLR inputs, the manual probably explains how to wire them to unbalanced sources. If not check the tech papers at Rane.com


All times are GMT. The time now is 04:46 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2