How can I fix my cd player Sony CDP-M26?

Katapum · 5th July 2007, 09:49 PM

Hi,

Sometimes when I push close key cd tray close and open again. How can I fix it?

I’m also looking to a service manual.

Katapum

Nigel Goodwin · 5th July 2007, 09:51 PM

It's usually just the small drive belt slipping.

Katapum · 5th July 2007, 10:22 PM

Quote:

Originally posted by Nigel Goodwin
It's usually just the small drive belt slipping.

I only see one belt in CDP and it seems ok but ….

Nigel Goodwin · 6th July 2007, 07:38 AM

If it's not the belt slipping then it's usually the limit switch.

Katapum · 6th July 2007, 08:45 AM

Quote:

Originally posted by Nigel Goodwin
If it's not the belt slipping then it's usually the limit switch.

How can I find limit switch without service manual?

Nigel Goodwin · 6th July 2007, 08:05 PM

Quote:

Originally posted by Katapum

How can I find limit switch without service manual?

By the obvious switch that the mechanism hits!

Katapum · 6th July 2007, 09:49 PM

Quote:

Originally posted by Nigel Goodwin

By the obvious switch that the mechanism hits!

I´ll try to find it.

Thanks Nigel Goodwin.

Katapum · 9th September 2007, 12:23 PM

Quote:

Originally posted by Katapum
Hi,

Sometimes when I push close key cd tray close and open again. How can I fix it?
Katapum

Hi,

Where can I find CXA1291P datasheets? What’s for CXA1291P chip?

Extreme_Boky · 10th September 2007, 03:19 AM

The IC appears to be dual operational amplifier, designed for "higher currents" probably around 100 to maybe 200mA to drive the motors. The Vcc and Vee are probably of larger area directly soldered to PCB tracks for cooling. You don’t really need data sheet to fault find - all the values you need are included in the service manual.

Good luck,
Boky

Katapum · 11th September 2007, 03:00 PM

5th July 2007, 09:49 PM	#1
Katapum diyAudio Member Join Date: Mar 2003 Location: Europe	How can I fix my cd player Sony CDP-M26? Hi, Sometimes when I push close key cd tray close and open again. How can I fix it? I’m also looking to a service manual. Katapum

5th July 2007, 09:51 PM	#2
Nigel Goodwin diyAudio Member Join Date: Jul 2005 Location: North Derbyshire	It's usually just the small drive belt slipping. __________________ Nigel Goodwin

6th July 2007, 07:38 AM	#4
Nigel Goodwin diyAudio Member Join Date: Jul 2005 Location: North Derbyshire	If it's not the belt slipping then it's usually the limit switch. __________________ Nigel Goodwin

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sony playstations for cd player use	Nanook	Swap Meet	4	20th November 2007 05:20 AM
Old CD player / Sony XB 940	Searcher	Digital Source	32	3rd October 2007 01:28 PM
Need a schematic for a SONY CDP-711 CD player	mauto	Digital Source	0	3rd August 2007 02:57 PM
Sony CDP-C215 CD Player	copyguy69	Digital Source	2	2nd March 2006 04:58 PM
mod sony ns755 dvd player help	upgrade88	Digital Source	3	16th October 2003 01:10 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th September 2007, 03:19 AM	#9
Extreme_Boky diyAudio Member Join Date: Dec 2003 Location: Sydney	The IC appears to be dual operational amplifier, designed for "higher currents" probably around 100 to maybe 200mA to drive the motors. The Vcc and Vee are probably of larger area directly soldered to PCB tracks for cooling. You don’t really need data sheet to fault find - all the values you need are included in the service manual. Good luck, Boky

11th September 2007, 03:00 PM	#10
Katapum diyAudio Member Join Date: Mar 2003 Location: Europe

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read