Shanling scd-t200c circuit diagrams wanted

MadMutt · 19th April 2007, 08:48 AM

Have in front of me a shanling scd-t200c.

Appears to be a power supply fault, no display and no transport action at all.
Tubes and two blue led's on the front (cd/sacd) glow.

Would really love the diagram of the power supply.
Or some voltage readings on the connectors for the supply section.

That is unless someone has knowledge of what may be wrong.
Save me the time of testing each and all reg.....

LemmyCaution · 23rd April 2007, 11:52 PM

I have the schematics though it may take me a day or two to locate and scan.

My Shanling sc cd200 was fine until last night. When I powered it up, two blue lights - no readout. Plays music but, something is amiss.

MadMutt · 24th April 2007, 12:18 AM

Almost exactly what this one is doing.
Same fault except this one has no transport action at all.

It ain't the power supply.

I have managed to find out though how to fix it.
Take it back to an authorised dealer for a wrnty board swap.

The controller board in the seperated sheilded section is known to have issues.
Shanling are swapping them under wrnty.

I would still love a copy of the service manual/schematic though.

Thanks.........

Let me know when ready to email it, I'll sent up a temp account to receive it.

dewi · 3rd February 2011, 06:46 PM

did you manage to find the schematics for the shanling scd-t200c ?? could you please forward a copy to me if you did - thank you very much - Nige

19th April 2007, 08:48 AM	#1
MadMutt diyAudio Member Join Date: Nov 2006	Shanling scd-t200c circuit diagrams wanted Have in front of me a shanling scd-t200c. Appears to be a power supply fault, no display and no transport action at all. Tubes and two blue led's on the front (cd/sacd) glow. Would really love the diagram of the power supply. Or some voltage readings on the connectors for the supply section. That is unless someone has knowledge of what may be wrong. Save me the time of testing each and all reg.....

23rd April 2007, 11:52 PM	#2
LemmyCaution diyAudio Member Join Date: Apr 2007	Same problem here - I have the schematics though it may take me a day or two to locate and scan. My Shanling sc cd200 was fine until last night. When I powered it up, two blue lights - no readout. Plays music but, something is amiss.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Interest for swap some circuit diagrams?	JoergST	Car Audio	20	30th September 2009 07:37 PM
DNM Power Amp Circuit Diagrams Wanted	mozfet	Solid State	3	29th August 2009 09:10 PM
Need circuit diagrams !	suntsu	Chip Amps	1	6th September 2006 04:13 AM
Circuit diagrams and service manual for Rotel RTC-850?	GJF	Solid State	2	5th August 2006 10:15 AM
Poogeing The SACD (Part Deux): Shanling SCD-T200C	KBK	Digital Source	7	1st December 2004 12:05 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th April 2007, 12:18 AM	#3
MadMutt diyAudio Member Join Date: Nov 2006	Almost exactly what this one is doing. Same fault except this one has no transport action at all. It ain't the power supply. I have managed to find out though how to fix it. Take it back to an authorised dealer for a wrnty board swap. The controller board in the seperated sheilded section is known to have issues. Shanling are swapping them under wrnty. I would still love a copy of the service manual/schematic though. Thanks......... Let me know when ready to email it, I'll sent up a temp account to receive it.

3rd February 2011, 06:46 PM	#4
dewi diyAudio Member Join Date: Jan 2011 Location: Pembrokeshire Gods own garden	did you manage to find the schematics for the shanling scd-t200c ?? could you please forward a copy to me if you did - thank you very much - Nige

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)