Using DCX2496 for transient-perfect crossovers?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
If I set up my DCX2496 for overlapping 2nd-order Linkwitz-Riley slopes, reverse the tweeter polarity, and add apropriate boost at the XO point with the PEQ function, will I not achieve transient-perfect behavior, as described here?

Seems logical to me, assuming IIR filters affect phase the same as analog circuits, but I'd appreciate some reality-check feedback.

TIA,

Bill
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.