|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Digital Line Level DACs, Digital Crossovers, Equalizers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
21st April 2005, 09:03 PM
|
#1 |
|
diyAudio Member
Join Date: Jul 2004
Location: Scottish Borders
|
Behringer DCX 2496 voltages?
Hi all,
just bought a digital xover. What are the input and output voltages when the clip LED is just about to light? Me thinks that 0dbu is too low (775mV rms) and +22dbu sounds too high (9.75V rms) or could the clip LED be reading peak and then the average will be about 10db to 20db below when playing music signal? |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Behringer DCX-2496 | Zero Cool | Swap Meet | 3 | 25th January 2009 09:39 AM |
| behringer dcx 2496 | buffalo52 | Digital Line Level | 8 | 11th August 2008 05:56 PM |
| WTB:Behringer 2496 | Ang | Swap Meet | 1 | 17th January 2007 05:31 PM |
| Behringer dcx 2496 | audio-kraut | Digital Line Level | 0 | 28th November 2005 05:30 AM |
| WTB: Behringer DCX 2496 | akunec | Swap Meet | 0 | 15th September 2005 04:57 AM |
| New To Site? | Need Help? |
