Hello
Could anyone please help me design or tell me which crossover to purchase for these speakers? the original crossover does not work any longer.
Crossover Type : 2-Way MTM Design. One tweeter and two Midwoofers
Midwoofer Name Seas Excel : w18ex001 8ohm times 2
Tweeter Name Vifa: XT25TG30-04 1" only one
Baffle Width & Height : 20.5 L X 7 W X 5.5 D Enclosure Notes : sealed
Any help would be greatly appreciated.
Thank you
Gus
Could anyone please help me design or tell me which crossover to purchase for these speakers? the original crossover does not work any longer.
Crossover Type : 2-Way MTM Design. One tweeter and two Midwoofers
Midwoofer Name Seas Excel : w18ex001 8ohm times 2
Tweeter Name Vifa: XT25TG30-04 1" only one
Baffle Width & Height : 20.5 L X 7 W X 5.5 D Enclosure Notes : sealed
Any help would be greatly appreciated.
Thank you
Gus
The basic - IMO - would be to do the following:
1. The two midranges placed close around the tweeter.
2. X-over around 2,1Khz - measurements would be essential.
3. Seas-drivers in parallel - to level out the sensetivity.
4. Serious damping of the resonans peak at around 5Khz.
I hope - cause an active DSP solution would handle this in a jiffy
1. The two midranges placed close around the tweeter.
2. X-over around 2,1Khz - measurements would be essential.
3. Seas-drivers in parallel - to level out the sensetivity.
4. Serious damping of the resonans peak at around 5Khz.
I hope - cause an active DSP solution would handle this in a jiffy
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.