Hello,
I have just built a freeDSP classic board, programmed it with arduino nano, but I get no sound on the speakers. When measured with a multimeter, I found that 1.6V DC are coming in and out of it. Is it normal? Cant tell if theres any AC in it, because I dont have the tools for that.
Also, judging from Teraterm output, It seems that it can write to eeprom with whatever write protection jumper possition, so maybe my arduino is faulty?
Thank you,
Tomas
I have just built a freeDSP classic board, programmed it with arduino nano, but I get no sound on the speakers. When measured with a multimeter, I found that 1.6V DC are coming in and out of it. Is it normal? Cant tell if theres any AC in it, because I dont have the tools for that.
Also, judging from Teraterm output, It seems that it can write to eeprom with whatever write protection jumper possition, so maybe my arduino is faulty?
Thank you,
Tomas
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.