diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Line Level (http://www.diyaudio.com/forums/digital-line-level/)
-   -   Help with converting Micromega T-Dac from 220V to 110V (http://www.diyaudio.com/forums/digital-line-level/242337-help-converting-micromega-t-dac-220v-110v.html)

hifi lofi 11th September 2013 03:06 PM

Help with converting Micromega T-Dac from 220V to 110V
 
Further to my post regarding the conversion of the T-drive CD transport I need to do the same modification to my T-dac.

I have a 220V Micromega T-dac that I would like to convert to 110V. I've opened the chassis and next to the transformer there appears what looks like a jumper. I'd appreciate if anyone could offer any advice on how to convert this to 110V. Is it just a case of removing the 220V jumber and soldering in one at the 110V points?

Below is a photo of the jumpers and transformer. The transformer has a schematic on it which suggests I would need to jumper both 110V positions. Is that correct? Any US owners of a T-dac here that could check there units to see how they are jumpered?

http://i198.photobucket.com/albums/a...ps2c29b00d.jpg

lesuisse 14th September 2013 09:33 AM

You have to remove the 220v jumper and place two jumpers where 110v is indicated.

hifi lofi 16th September 2013 10:03 AM

Thanks. That's what I thought but just wanted to be sure before I blow the transformer.


All times are GMT. The time now is 08:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2