diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Line Level (http://www.diyaudio.com/forums/digital-line-level/)
-   -   Upgrading TE7022L (http://www.diyaudio.com/forums/digital-line-level/232919-upgrading-te7022l.html)

giant420 27th March 2013 04:38 PM

Upgrading TE7022L
 
Hello all, I have been lurking for a while and finally made a purchase worth posting about. I recently bought the HA Info U2 Plus USB DAC / headphone amp. So far it sounds pretty great with my HD 280 Pros, and I am starting to wonder what else is available to modify. I already replaced the included opa2604 with a opa2134 that I had lying around. It definitely sounds noticeably better, but I am still interested in trying other op-amps out (AD797BRZ?).

On to my main question.. Is it possible to simply replace the TE7022L with something like the TE8802, which supports 24/192 and async usb? Will anything else need upgrading?

I am totally new to this hobby, so any other suggestions would be greatly appreciated!

JLOP 27th March 2013 06:00 PM

Good question, thanks for asking !

Nanoloop 28th March 2013 01:58 AM

I think first change the xo for the te7022. it is 12mhz. change to tent labs if the price is okay for you and you can make it fit ok. maybe change the 3.3V regulators ?

Another choice :

ͧ*响

but I think no need to change. better to buy another good product to compare - es9023 dac.

jambul 28th March 2013 03:21 AM

imo, you can add the filter on the power suply, the Odac filtering the supply from usb connection using 1.0mh inductor.

and then separate the supply for TE7022 & supply for Clock, and change the clock by the better one

:-)

enjoybiking 31st March 2013 08:19 PM

CLock Fox 924B TCXO
 
Quote:

Originally Posted by jambul (Post 3430743)
imo, you can add the filter on the power suply, the Odac filtering the supply from usb connection using 1.0mh inductor.

and then separate the supply for TE7022 & supply for Clock, and change the clock by the better one

:-)


I have used the Fox 924B TCXO with the TE7022, a very easy transplant. I agree you will want separate regulators for the clock, the Tenor chip, the DAC, and whatever else. The Micrel 5209
MIC5209-3.3YS TR Micrel Inc | 576-1274-1-ND | DigiKey

is a pretty low noise regulator and has a big enough package to work with without a PCB. I would use a SMD ferrite bead in series with the TCXO V+ input pin, and maybe a .01uF cab to ground from the V+ pin.

Odac schematic is here:

http://www.yoyodyneconsulting.ca/dow...AC-release.pdf

it would help you chose power filtration for certain pins on the TE7022, and shows you the pin# 37 you need to inject the clock at after removing the old crystal, if that is all you have. You will see ODAC filters the TE7022 internally-generated 1.8V pin...

Some people like USB isolators [possible on a TE7022], some people like a very very short standard USB cable, like a few inches long.


All times are GMT. The time now is 07:23 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2