|Digital Line Level DACs, Digital Crossovers, Equalizers, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|13th February 2013, 12:47 AM||#1|
Join Date: Feb 2013
Need DEQ wiring layout and parts help... Wireless Line Array (First Build)
I usually design furniture but I've always had an interest in Audio Equipment, so i thought I'd finally take the plunge and build my own speakers. The original idea was to build a Line Array that I could connect my phone or laptop to wirelessly… I got in a bit over my head.
I've included diagrams of how I am setting up the system with a toslink connection before the deq. (Originally I planned on analogue in to the DEQ but things got a bit complicated and I don't have that much room to work with in the enclosure I am designing. I'm including it here as a reference to my fallback design if using an optical in is fundamentally flawed.)
Analogue Alternative Backup Version
Question 1: How can i add a master control to the volume? I've been looking at the DIY LPA and the CL-RLC, but I'm unsure of where to hook them up at in the system. I figured it would go okay between the DEQ and the amp board, but I don't know if they would cause clipping or distortion.
DIY Lightspeed Passive Attenuator
Question 2: what am i missing from my setup? This is a serious question, i'm unsure if there are discrepancies between the input and output levels of each of the components. Do i need Passive Attenuators or anything anywhere in my setup? (I'm not totally sure of what a Passive Attenuator is or how to use one)
Question 3: are there any fundamental flaws? Am I over simplifying or over complicating the design?
Question 4: Is there a way for me to split the toslink in to select between two audio sources easily? This isn't necessary, but would be a nice extra.
Here is the Parts List:
Dayton Audio ND90 8ohm (x48) 24 per channel
Dayton Audio ND90-8 3-1/2" Aluminum Cone Full-Range Driver 8 290-210
Material: Walnut or hard maple
Volume: 1.5l Sealed
2x300W TAS5630 Class-D Amplifier Board
2x300W TAS5630 Class-D Amplifier Board 320-309
Amplifier Power Supply:
48 VDC 12.5A 600W Regulated Power Supply
48 VDC 12.5A 600W Regulated Power Supply 320-317
DEQ - Behringer DEQ2496 Ultracurve Pro
Behringer DEQ2496 Ultracurve Pro Digital EQ/RTA 248-661
Any help would be appreciated, thanks.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|line array wiring info.||J.k.Wilson||Multi-Way||3||26th August 2005 04:15 AM|
|Line Array Layout Question||sdclc126||Multi-Way||2||23rd August 2005 11:35 PM|
|Line array wiring suggestions||mazeroth||Multi-Way||3||12th April 2005 11:28 PM|
|line array wiring question||mcargill||Full Range||9||14th January 2005 09:34 PM|
|wiring a line array loudspeaker||vangre||Multi-Way||1||6th December 2003 11:48 PM|
|New To Site?||Need Help?|