diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Line Level (http://www.diyaudio.com/forums/digital-line-level/)
-   -   Any toughs on the Audiophonics PCM1796 or DAC7 be weiliang (http://www.diyaudio.com/forums/digital-line-level/227383-any-toughs-audiophonics-pcm1796-dac7-weiliang.html)

Izuall 9th January 2013 09:30 AM

Any toughs on the Audiophonics PCM1796 or DAC7 be weiliang
 
Hello,
I would like some feedback on these 2 DACs...(im curently trying to make a DIY
"Reciever" aka S/PDIF DAC-preamp-2 x LM4780(mono mode)power amps(witch are more likely to be from Audiosector).
DAC7 by weiliang
Audiophonics DAC1796

I plan on upgrading them with beter caps/resistors and OP amps.
Any feedback and other sugestions are welcome.
Thank you.

vinodt1347 19th January 2013 11:08 PM

I have tried the stock DAC7 by weiliang. It sounds very good. However I think the power supply implementation runs extremely hot and filter caps and other components are too close. I have a concern over that. The pcb already has some good components. Do you have a specific plan of what to upgrade?

Izuall 23rd January 2013 05:34 PM

Actualy ive given up on building/modding..a DAC from a kit.After reading for a while it apears its best to buy a readybuilt one..im looking at the Arcam rDAC and Schiit Bifrost..(still cant decide witch but i have plenty of time since im not planing on a purchese till i have the cash for the whole system).
But thx for the feedback.


All times are GMT. The time now is 04:32 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2