I just got the miniDSP 2x4 yesterday but when I went to hook it up I ran into a problem. I want the miniDSP to work with all sources so I thought I would put it between the preamp and amp. I have a Marantz SR 6005 which has Pre-Out but I'm not sure about the Main-in for the amp. And it doesn't have a tape monitor loop either. Any ideas?
Here is a link to a pic of the back of the receiver. Marantz US | SR6005
Any ideas are appreciated.
Any ideas are appreciated.
I just got the miniDSP 2x4 yesterday but when I went to hook it up I ran into a problem. I want the miniDSP to work with all sources so I thought I would put it between the preamp and amp. I have a Marantz SR 6005 which has Pre-Out but I'm not sure about the Main-in for the amp. And it doesn't have a tape monitor loop either. Any ideas?
The input/output list specifically shows that it doesn't have a main in. I am afraid you might be out of luck.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.