|Digital Line Level DACs, Digital Crossovers, Equalizers, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|17th June 2012, 03:33 PM||#1|
Join Date: Jun 2006
Location: Whittier (greater Los Angeles area)
SCR2496 LOCK ERROR
I hope someone can give me some direction here. I recently purchased a new DEQ2496 and a used SRC2496.
At first everything worked fine. But recently the SRC2496 has begun to NOT lock and of course either drop out completely or go back and forth with producing output.
I am using the same computer S/PDIF feed. Originally I was sending a 24/48 signal from my computer. When I changed to 24/96 I began to have syn lock problems. Going back to the lower sample rate seemed to help for a while.
If I connect the coax spdif from my computer to my W4S DAC-2 there is no syn problem. If I connect it to the DEQ2496 with and XLR adaptor the DEQ2496 also receives the digital input consistently. The SRC296 just blinks its red LOCK LED.
If I send the spdif to the QED2496 first and then connect the XLR digital out to the XLR digital in on the SCR2496 the LOCK LED still flashes continual and no input sample rate is displayed, BUT it will play from time to time with drop outs (muted output because of lack of LOCK).
HELP PLEASE! Any ideas? Is the SCR2496 failing?
Thanks in advance for any input.
|17th June 2012, 04:00 PM||#2|
Join Date: Oct 2004
Location: Kona, Hawaii
Blog Entries: 4
It does sound like a problem with the SCR. I have the DEQ and DCX, but not the SRC so can't speak from experience on that unit. The DEQ is rock solid in and out, tho.
Hopefully, some SCR2496 owners can chime in here.
Take the Speaker Voltage Test!
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Electromagnetic lock||scottfx2||Planars & Exotics||5||1st July 2011 04:37 AM|
|S/PDIF Lock Noise||Josuah||Digital Line Level||6||10th June 2009 06:21 AM|
|Marantz CD63 KI SIG, Error 12, Sled Error problem||sisik||Digital Source||1||9th November 2008 03:12 PM|
|Whats worse, 1db error in response curve or a phase error of 6?||primalsea||Multi-Way||5||13th May 2003 01:24 AM|
|Cs8414 Lock LED||leo529||Digital Source||1||24th November 2002 01:14 PM|
|New To Site?||Need Help?|