|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Digital Line Level DACs, Digital Crossovers, Equalizers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
20th March 2012, 03:47 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2006
Location: italy
|
TDA1540 CLCF reclock
After a couple of years of NOS service I'd try again the oversampler SAA7030 between the SAA7000 and the TDA1540 dacs. Also I wanted to reclock all the 4 signals before entering DACs: CLCF, L+R, STR1. I used four 74AUC1G74 flip flops and I'm able to reclock L+R and STR1 signal, but CLCF doesn't work: no sound and no signals both on Q and Q/ on scope. Note that flip-flop is ok as it works with another signal. I'm not expert at all on this so.... any suggestion would be appreciated!
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DEM reclock with TDA1540 | fvale | Digital Line Level | 3 | 3rd March 2011 02:33 PM |
| TDA1540 decoupling caps | wutzke | Digital Source | 5 | 27th August 2010 10:52 AM |
| From TDA1540 to TDA1541 | D.A.R.R.Y.L. | Digital Source | 21 | 18th November 2009 11:51 AM |
| TDA1540 passive I/U Stage ??? | caine28 | Digital Source | 8 | 28th December 2008 10:32 PM |
| TDA1540 analogue stage | dariusku | Digital Source | 2 | 9th September 2005 07:01 AM |
| New To Site? | Need Help? |
