2 x miniDSP balanced with analog switch suggestions - diyAudio
Go Back   Home > Forums > Source & Line > Digital Line Level

Digital Line Level DACs, Digital Crossovers, Equalizers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 23rd February 2012, 02:45 AM   #1
diyAudio Member
 
Join Date: Jul 2010
Default 2 x miniDSP balanced with analog switch suggestions

Hi - warning, I am quite inexperienced so am hoping for some help! Apologies if this is the wrong sub-forum

I have an integrated 2 channel and HT system to which I want to add stereo subwoofers. Due to the limitations of access and where I can fit the subs, my only real option is passive subs with external crossover and amps.

For 2 channel use, I want to use the unbalanced pre outs from my 2 channel pre to send to a balanced miniDSP, take out everything above 50Hz, then send to balanced ICEpower power amps to drive the subs. I will then EQ using miniDSP as well.

For HT use, I want to use the AVR front pre outs to send to the HT bypass of the 2 channel pre to drive my front speakers. I want to send the LFE channel to another balanced miniDSP for EQ purposes, then out to the power amps. The AVR will probably cross at 80Hz.

I don't need to have input from both the pre and the AVR at the same time, and I think the EQ parameters may be different between the two implementations. I need the balanced miniDSPs as the input sensitivity of the power amps is 2Vrms.

I would like some suggestions on parts, process, design etc. My rough layout thoughts are:

Single enclosure, 240V AC input
Internal power supply to convert 240v AC to 12V DC to drive the miniDSPs
2 x miniDSP balanced kit boards
4 x RCA inputs
2 x XLR outputs
2 x USB connections to program miniDSPs
Design for some form of switch to choose between the outputs of the two miniDSPs to send to the XLR outputs. Switchable from front of enclosure
Power switch, preferably on the front.
Possibly a pot for each miniDSP to vary the volume digitally for fine tuning of output

I am very new to this, so don't know exactly what I need for parts, whether or not having the power supply in the enclosure is a good idea, how difficult it would be to implement the switching arrangement etc.

Any feedback I can get would be much appreciated - thanks in advance
  Reply With Quote
Old 25th February 2012, 05:26 PM   #2
diyAudio Member
 
Join Date: Jun 2009
So you have a biamp with two inputs and a possible need to vary the DSP config based on which input is selected? If so a single 2x4 is probably fine. While the ADAU1701 SigmaDSP part used in the MiniDSP 2x4 has only two ADCs most gear has a SPDIF out you should be able pick up with a MiniDIGI.

SigmaDSP hardware and SigmaStudio support varying the DSP configuration based on what input is selected. I'm not familiar with MiniDSP's software so I can't tell you if it's supported at their level---the MiniDSP forum would be a better place to ask.
  Reply With Quote
Old 27th February 2012, 06:07 AM   #3
diyAudio Member
 
Join Date: Jul 2010
Thanks Twest - I suspect my level of knowledge is seriously lacking after doing alot more reading. I think the questions I am asking are a bit too basic - I will need to refine what I am asking. Cheers
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
My miniDSP project/suggestions doug20 miniDSP 13 20th December 2010 01:23 AM
Introducing miniDSP Balanced Kit minidsp miniDSP 3 29th September 2010 07:38 PM
Quad SPST Analog Switch RCruz Solid State 7 25th November 2008 12:07 PM
Analog SSM2404S switch stef1777 Parts 2 12th April 2006 09:38 PM


New To Site? Need Help?

All times are GMT. The time now is 09:22 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2