|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Digital Line Level DACs, Digital Crossovers, Equalizers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
12th February 2012, 01:14 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2010
Location: Warsaw
|
cs8416 problem in software mode
Hi guys, i've got a problem with CS8416 chip in software mode. Communication by I2C i working properly, i can read and modify all registers. But the problem is decoding by this chip. I use signal from CD(44.1khz) or from TV (48khz), but when i get error bits from registry-all of them occurs. Is there any 'trick' in configuration of CS to start decoding properly? All Freq. are good and remains stable. Also most important for me registry and interrupt remains empty-i need q-subcode information-but it is still 0 and interrupt flag is not set. For any help i will be gratefull.
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CS8416 in Software Mode | eehobby | Digital Line Level | 19 | 26th March 2013 03:04 AM |
| Problem with CS8416 | baglio | Digital Source | 4 | 5th October 2009 06:18 PM |
| CS8416 in sw slave mode with external clock | milandks | Digital Line Level | 0 | 29th March 2009 09:45 PM |
| Help me set up CS8416 in HW mode | ezkcdude | Digital Source | 6 | 2nd May 2006 10:08 PM |
| DF1706 and software mode control? | WTS | Digital Source | 8 | 25th March 2004 10:02 PM |
| New To Site? | Need Help? |
