DacMagic II failure
I was testing my new BluRay unit using for audio signal one of the BNC connections (by a S/PDIF adaptor) and suddenly the sound disappeared.
After several tryouts it is clear than position "CD" from selector does not work. Maybe it is something very stupid but, being in the situation of opening the machine, why do not update it a little? :)
Does anyone can provide me a link to the service manual of Dacmagic II ?
I've tryed to reach it from the web but the only result I've found is a very poor image lo-res from this link from Eservice
On an old thread it was a link to the service manual but it does not work
Many thanks in advance
Is this the one?
The OpAmps NE5532 would be the first ones to go... even the Op275 ones can get inprovements.
Oh... That one is too new for me.
My machine is just the previous one, DacMagic II MkII
Mine is something like this one
Anyway, many thanks SoNic_real_one :)
Ah, that goes to 48kHz samplerate only.
Just look inside, the switching circuit in front of the SPDIF receiver should be similar...
Eventually look on the input/DAC section of Azur 740C, I did read that is similar with yours.
I'm afraid both DacMagic's they only share the brand "Cambridge Audio" and about the Azur, sorry I do not see the equalness.
Hope someone can help me with the Service Manual.
Many thanks, of course to SoNic_real_one. You are really trying to help me :)!!
How does the Krell SPB-32X compare with current DACs?
I am considering replacing my 10 year old Krell SPB-32X with a current budget DAC (Cambridge DAC Magic) in order to decode 96/24 tracks...
I can sell the Krell for about the cost of a current budget DAC - but the fact that the Krell still sounds great make me wonder if I should keep it, considering that it originally cost $3,500. and is built like the proverbial ton of bricks...
So my question is will there be a major noticeable improvement in the sound after exchanging it for a current DAC? Or am I comparing Apples and oranges?
Hello to all involved on this threat
I've found this old post http://www.diyaudio.com/forums/digit...ic-needed.html
I've read it and that's my problem!! My DacMagic 3 has dead BNC connections and only Optical working... After switching my DVD Player to a brand new Blu-Ray player and using frequencies higher than 48Khz (me, as an idiot, do select 96 Khz and even 192 khz). And to be sure where was the problem, I did try both BNC inputs...
This morning I was starting to accuse the BR player ;)
Well, let's locate the 8-Pin DIP 9637 and replace it.
Have a nice Sunday morning!!
|All times are GMT. The time now is 01:05 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio