diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Line Level (http://www.diyaudio.com/forums/digital-line-level/)
-   -   Rotel Processor (http://www.diyaudio.com/forums/digital-line-level/193362-rotel-processor.html)

Koenjer 27th July 2011 07:54 AM

Rotel Processor
 
Hi There,

i need some help with upgrading my rotel processor.
I'm using digital input, so I'm starting with upgrading the analog output section.

I have the schematics, and made a short version of the signal flow.
See attached picture.

There are some things that IMO can be left out:
- First is the cinema EQ
- maybe some coupling capicitors? (there are 5 of them in the signal path)

I allready updated the Opamps for LME49860. All the capicitors in the signal path will be replaced with MUSE BP ones.

There is also a mute circuit at the end. Can i leave that one out to?

Thanks in advance for your help.

best regards,

Gijs



http://www.upload12.nl/output/1311752614.jpg

kirkan 6th February 2012 12:25 AM

Hi Koenjer!

I'm thinking of improving the analog section of RSP1068 was thinking of replacing the TL072 for a OPA or AD op amps but I see that you thought in a LME49860, I think that's good, what is your experience? and made ​​the changes? have you thought about putting the LME in A class? I am very interested in your results.

Best Regards


All times are GMT. The time now is 06:24 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2