|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Digital Line Level DACs, Digital Crossovers, Equalizers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
25th July 2011, 03:00 AM
|
#1 |
|
diyAudio Member
Join Date: Apr 2005
Location: Simcoe Ont
|
Spdif to AES cable
I just hooked up a new system.
RME card to Panasonic DA7 digital mixing console. Spdif out from card to XLR on board The mixer has a switch for AES or spdif. The RME manual suggests XLR pin 2 to RCA tip, XLR pin 3 to rca sleeve and XLR pin 1 to shielding which is cut short of RCA. DA7 manual suggests RCA to a coaxial cable with RCA on one end XLR on the other. 2 being hot, pin 3 and 1 jumped together. Which is the best way? and what is the best cable to use? RCA end is the Spdif source. Thanks |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Digital SPDIF-AES/EBU interconnect | Nuuk | Digital Source | 3 | 11th April 2012 07:22 PM |
| Spdif > aes | nonsub | Digital Line Level | 10 | 5th February 2010 05:36 AM |
| Pulse transformers SPDIF/AES-EBU | Kurt von Kubik | Digital Line Level | 14 | 14th November 2009 04:50 PM |
| AES/EBU to SPDIF coax input, how? | tubenut | Digital Source | 48 | 16th February 2005 07:45 AM |
| SPDIF to AES/EBU | Kari | Digital Source | 4 | 21st February 2004 11:29 PM |
| New To Site? | Need Help? |
| Page generated in 0.04841 seconds (75.56% PHP - 24.44% MySQL) with 10 queries |
