diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Line Level (http://www.diyaudio.com/forums/digital-line-level/)
-   -   Problems on Tag McLaren AVR32R panel (http://www.diyaudio.com/forums/digital-line-level/193031-problems-tag-mclaren-avr32r-panel.html)

flambart 21st July 2011 11:49 PM

Problems on Tag McLaren AVR32R panel
 
Hi, I'm trying to repair a Tag McLaren AVR32R audio/video processor.

All the voltages are ok, but the front panel is completely off, the gas display and all the leds.
Unfortunately, I have no schematics at all, but it seems that some AC 2,5-0-2,5 voltages are directly connected to the panel, with no rectifiers. More precisely, these voltages are connected to the gas display assy.

I've found a SMD diode (D4 on PCB) that apparently is short-circuited. This diode is marked "1329" or "B29" or something like this. I'm not able to find out any info about it, so I don't know if it's a zener or anything else

This diode is connected between the central pin of famous 2,5-0-2,5 AC voltages (not directly grounded) and the ground, in parallel with a 22uf/35v capacitor

Someone could help me? Any schematics would be obviously really appreciated, but even knowing more about this lovely diode could probably be really useful

As usual, thanks so much to everyone for your kind helping hand

Ciao, Paolo

flambart 22nd July 2011 02:26 PM

My mistake
 
Sorry: of course, it's not a gas display but a vacuum fluorescent display....

I apologize for the mistake


All times are GMT. The time now is 01:38 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2