Dual Wire AES/EBU Output to Single Wire AES/EBU Input

EUT · 5th January 2011, 02:46 PM

This may have been dealt with before, though I could not find any useful info.

My 192kHz audio signal exits through dual AES/XLR outputs with 96kHz each for each channel. Is there a way to connect these dual AES outputs into a single AES/XLR input at my DAC, which can receive a 192kHz signal ?
Many thanks for any info
Ernst

rfbrw · 6th January 2011, 11:49 PM

RME ADI-192DD. I know of no inexpensive solution short of building your own converter.

EUT · 7th January 2011, 07:00 AM

Thanks for pointing me to the RME ADI-192DD, which is indeed too dear for the narrow purpose intended. You are right, I will have to build my own device. I am looking now for a suitable circuit design, but must admit I am new to digital conversion, which does not make it easy.

5th January 2011, 02:46 PM	#1
EUT diyAudio Member Join Date: Jan 2011	Dual Wire AES/EBU Output to Single Wire AES/EBU Input This may have been dealt with before, though I could not find any useful info. My 192kHz audio signal exits through dual AES/XLR outputs with 96kHz each for each channel. Is there a way to connect these dual AES outputs into a single AES/XLR input at my DAC, which can receive a 192kHz signal ? Many thanks for any info Ernst

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ADDIND AES/EBU output mods TO CD TRANSPORT	danhil	Digital Source	2	18th September 2010 11:41 AM
Balanced AES/EBU (SPDIF) input circuit (to DIR9001)	novec	Digital Line Level	19	24th May 2010 12:15 PM
Marantz CD63 with AES/EBU output mods	Will	Digital Source	4	10th April 2007 09:06 AM
74xx74 a good digital output (AES-EBU/SPDIF)driver?	Dr.H	Digital Source	3	7th April 2005 03:10 PM
AES/EBU to SPDIF coax input, how?	tubenut	Digital Source	48	16th February 2005 07:45 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th January 2011, 11:49 PM	#2
rfbrw diyAudio Member Join Date: Oct 2001 Location: .	RME ADI-192DD. I know of no inexpensive solution short of building your own converter.

7th January 2011, 07:00 AM	#3
EUT diyAudio Member Join Date: Jan 2011	Thanks for pointing me to the RME ADI-192DD, which is indeed too dear for the narrow purpose intended. You are right, I will have to build my own device. I am looking now for a suitable circuit design, but must admit I am new to digital conversion, which does not make it easy.