Help hooking up Audio Alchemy DTI v2.0

komomai · 28th November 2010, 09:00 AM

Aloha, Just bought a Audio Alchemy Dac V1.1 and a DTI V2.0. The Dac is working fine, but I'm confused on how to hook up the DTI. I have an I2S buss cable. Do I need a BNC/RCA connector to make the DTI work? Mahalo for any help.
Aloha,
Komomai

ihear21khz · 1st December 2010, 01:08 AM

The DTI should first be hooked to your transport's digital output via a 75ohm BNC or RCA connection whichever is available. The DTI's digital output is then connected to the DAC V1.1 digital input using either a 75ohm RCA (or BNC whichever is available) cable or to the I2S connection via the I2S buss cable. You need to be sure that the DacV1.1 supports I2S despite the fact that there is a facility for connecting it to an I2S cable.

komomai · 4th December 2010, 12:57 AM

Thanks for the information. Will start to hook it up.
Aloha,
Komomai

28th November 2010, 09:00 AM	#1
komomai diyAudio Member Join Date: Sep 2009	Help hooking up Audio Alchemy DTI v2.0 Aloha, Just bought a Audio Alchemy Dac V1.1 and a DTI V2.0. The Dac is working fine, but I'm confused on how to hook up the DTI. I have an I2S buss cable. Do I need a BNC/RCA connector to make the DTI work? Mahalo for any help. Aloha, Komomai

4th December 2010, 12:57 AM	#3
komomai diyAudio Member Join Date: Sep 2009	Help hooking up Audio Alchemy DTI v2.0 Thanks for the information. Will start to hook it up. Aloha, Komomai

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
F/S Audio Alchemy DTI-Pro32	rubicon	Swap Meet	3	27th November 2010 06:51 PM
FS- Audio Alchemy DTI PRO 32	leadcoma	Swap Meet	2	18th February 2009 03:53 PM
FS: Audio Alchemy DTI Pro w/ Power station 4 supply	silica	Swap Meet	0	2nd March 2008 08:19 AM
audio alchemy help	HIPCHECK	Digital Source	2	1st June 2005 07:11 PM
FS: Audio Alchemy DTI	mourip	Swap Meet	2	1st February 2005 01:47 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st December 2010, 01:08 AM	#2
ihear21khz diyAudio Member Join Date: Feb 2009	The DTI should first be hooked to your transport's digital output via a 75ohm BNC or RCA connection whichever is available. The DTI's digital output is then connected to the DAC V1.1 digital input using either a 75ohm RCA (or BNC whichever is available) cable or to the I2S connection via the I2S buss cable. You need to be sure that the DacV1.1 supports I2S despite the fact that there is a facility for connecting it to an I2S cable.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)