Is my amp damaging my preamp? - diyAudio
Go Back   Home > Forums > Source & Line > Digital Line Level

Digital Line Level DACs, Digital Crossovers, Equalizers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th November 2010, 04:27 PM   #1
diyAudio Member
 
Join Date: Oct 2010
Default Is my amp damaging my preamp?

I have a Meridian G68 preamp/processor and a Pass Labs XA30.5 amp. The Meridian G68 has been freezing up. My Meridian dealer suggested that the problem was attributable to DC leaking into the preamp from the amp via the interconnects. The G68 has been modded. I don't know for sure, but I think that the modder may have removed the AC coupling capacitors. I'm thinking that might confirm my dealer's theory that DC is leaking into the Meridian G68.

Other symptoms:

-When the G68 freezes up, the only way to get it to respond is to unplug it and plug it back in.

-When the G68 freezes up and I power it down, sometimes a loud "popping" noise is emitted by the speakers.

-These same symptoms occurred earlier this year, and after several months, it killed the PSU in the G68. It now has a new PSU, but the problem has returned.

Can anyone tell me if they have every heard of something like this?

Thanks!
Bryon
  Reply With Quote
Old 8th November 2010, 04:31 PM   #2
diyAudio Member
 
Join Date: May 2001
Location: Bangalore, India
I once had a DC coupled pre-amp connected to a Walkman. It was excessive DC that killed the Walkman in a very short time. Put back the output coupling caps on your Meridian preamp. Hope this helps.
__________________
Sam
  Reply With Quote
Old 8th November 2010, 04:37 PM   #3
diyAudio Member
 
Join Date: Nov 2009
Location: Pune
PowerON both the amp and preamp. Connect multimeter in between both's ground. Check if there is any potential difference. Ideally it should be zero. Also put a poly cap of 2.2Uf as coupling between them and see if the problem persists.
__________________
There is always a first time....
  Reply With Quote
Old 8th November 2010, 04:45 PM   #4
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
All sounds highly suspicious to me. Any respectable output stage (in a preamp) should be able to source or sink a few milliamps at least, something like the meridian I would guess even more. So it would be a pretty major fault on the power amp to put that kind of current back into it's input.

Obviously without seeing either it makes sense to at least check the Pass amp has zero volts on it's input with nothing connected. Be aware of creating severe hum/noise if you leave speakers connected while measuring.

Sounds more like issues or design issues with the Meridian to me.
__________________
-------------------------------------------------------
A simulation free zone. Design it, build it, test it.
  Reply With Quote
Old 8th November 2010, 11:20 PM   #5
diyAudio Member
 
Join Date: Oct 2010
Thanks for the input. I spoke with my Meridian dealer again, and he has changed his mind about the source of the problem. He no longer thinks it is the amp.

I will be sending G68 back to Meridian America for repair.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DC Coupling for MC Cartridges - how much error voltage before coil damaging tiefbassuebertr Analogue Source 20 10th June 2013 08:09 AM
damaging a new needle with used records? camshaft Analogue Source 10 22nd February 2008 09:03 PM
This isn't damaging my system is it? Prismatic Subwoofers 5 3rd July 2006 08:34 AM
GC damaging speakers? drfrink24 Chip Amps 33 6th April 2005 04:32 PM


New To Site? Need Help?

All times are GMT. The time now is 04:08 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2