Hi,
it depends on the topology of the current sources within the DAC.
But most current steering DACs I know must have their outputs connected to a low-impedance current path. For example You could use a single DAC-output of the PCM1794A (and alikes) if You connect the inverted partner output to gnd.
jauu
Calvin
it depends on the topology of the current sources within the DAC.
But most current steering DACs I know must have their outputs connected to a low-impedance current path. For example You could use a single DAC-output of the PCM1794A (and alikes) if You connect the inverted partner output to gnd.
jauu
Calvin
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.