I'm planning on building a DAC based on this.
The one thing that has been wondering is - the CS4397 has a ~ 2.5V output if you grab just one of the differential outputs (i.e., R- and L-). That's already above the 2.0V send to most amps.
What would the gain be of the Fetishizator circuit and what output level should I be aiming for?
The one thing that has been wondering is - the CS4397 has a ~ 2.5V output if you grab just one of the differential outputs (i.e., R- and L-). That's already above the 2.0V send to most amps.
What would the gain be of the Fetishizator circuit and what output level should I be aiming for?
Come on guys...at least a few comments before I dive elbow deep into my soldering station.
Will this setup deliver the clean vacuum tube sound it purports to? I realize a voltage divider will be needed at the input to drop the signal a bit and I'm following the modifications detailed in the guide (lampizator web site) for a high level, voltage input.
Will this setup deliver the clean vacuum tube sound it purports to? I realize a voltage divider will be needed at the input to drop the signal a bit and I'm following the modifications detailed in the guide (lampizator web site) for a high level, voltage input.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.