Wolfson WM8741 Evaluation Board

[ChrisR1983]

Guys

For this eval board I have purchased the 2x 12v transformer: AC 230 V Toroidal Mains Transformers : Mains Transformers : Maplin

Am I right in saying I can connect this directly to the Wolfson eval boards connections for + and - 12v?

Thanks

Chris

[glt]

No. You need DC +12 and DC -12. Each of the secondaries connect to a regulated power supply generating +12v and -12v

[ChrisR1983]

I thought the eval board did this as it included a rectifier?

What can I use to convert my 2x 12v AC to DC that is easy and inexpensive?

Thanks

Chris

[paulb]

Power Supply for Preamps

[ChrisR1983]

Thanks Paul; that's a little beyond my capabilities.

Any other simple ideas?

[glt]

You can use something like this: Low Current Bipolar Power Supply (LCBPS) - A Regulated CLRC Supply

ebay has other kits but they take a "center-tapped" secondary. Since you have dual secondaries, you need a power supply that takes in dual secondaries...

[ChrisR1983]

will K18231A Power Supply : Miscellaneous Kits : Maplin work?

[glt]

That kit will only provide the +12v. You need a kit that has two regulators: one for positive voltage and one for negative voltage

[richie00boy]

Originally Posted by glt

ebay has other kits but they take a "center-tapped" secondary. Since you have dual secondaries, you need a power supply that takes in dual secondaries...

No you don't. Simply connecting the two windings in series gives you a "centre tap".

Chris I don't think you will find what you need as a ready made item. Have you a small budget for the power supply? As I may be able to build one for you.

[glt]

I was trying to make it easy for the guy... :-)