diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Line Level (http://www.diyaudio.com/forums/digital-line-level/)
-   -   Digital Room Correction and Foobar2000 Convolve (http://www.diyaudio.com/forums/digital-line-level/146378-digital-room-correction-foobar2000-convolve.html)

mr.duck 23rd June 2009 01:06 PM

Digital Room Correction and Foobar2000 Convolve
 
Is there any setup guide about on the web that documents measuring in room freq responce and digital room correction?

There is a convolve plugin for foobar2000 that's easy to set up. But generating the impulse file is more tricky.

I'd like to hear from anyone that uses DRC. Is it worth it? What equipment and software did you use to set it up?

anbello 23rd June 2009 05:49 PM

I used this microphone pre with a DIY mic built with this capsule (see this guide) and an envy24 based audio card.
For the procedure to obtain the impulse response i followed step by step the guide on DRC site using a PC with linux and alsa driver for the mentioned audio card (but it's possible to do the same thing in windows - there are win exe in the DRC source archive).
Then i converted the two impulse resp (for left and right) pcm float32 to a single wav (signed 32 bit pcm) with audacity to use it in the foobar convolver.

ciao
andrea


All times are GMT. The time now is 01:56 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2