Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Line Level DACs, Digital Crossovers, Equalizers, etc.

PCM 1702 I/V Stage
PCM 1702 I/V Stage
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th June 2009, 02:52 PM   #1
schmike is offline schmike  Hong Kong
diyAudio Member
 
Join Date: Oct 2004
Location: Hong Kong
Default PCM 1702 I/V Stage

anyone can told me how can i built the Tube i/V stage
I find out have a srpp circuit but i think it is out of phase
i want to built a same phase i/v stage using tube
the maxium i/v resistor for pcm 1702 is 1k
i can't find the good circuit
please help
  Reply With Quote
Old 15th June 2009, 06:34 PM   #2
tritosine is offline tritosine
diyAudio Member
 
Join Date: Aug 2008
http://www.diyaudio.com/forums/showt...threadid=16576
  Reply With Quote
Old 16th June 2009, 04:30 PM   #3
schmike is offline schmike  Hong Kong
diyAudio Member
 
Join Date: Oct 2004
Location: Hong Kong
THX
BUT It also is out of phase
I don't want to use opt or I/V TX for this output
srpp is 180 degree phase shift from the input
so the ciruit isn't the best circuit
anyone can give me a better circuit for me?
  Reply With Quote
Old 17th June 2009, 08:15 PM   #4
Bill Fuss is offline Bill Fuss  United States
RIP
 
Join Date: Oct 2005
Location: Central Florida
Invert the digital signal.
  Reply With Quote
Old 18th June 2009, 08:06 PM   #5
Guido Tent is offline Guido Tent  Netherlands
diyAudio Member
 
Join Date: Dec 2001
Location: Eindhoven
Quote:
Originally posted by schmike
THX
BUT It also is out of phase
I don't want to use opt or I/V TX for this output
srpp is 180 degree phase shift from the input
so the ciruit isn't the best circuit
anyone can give me a better circuit for me?
2nd option: invert the speakers

anyhow, there is no such thing as absolute phase
__________________
Guido Tent
www.Tentlabs.com
  Reply With Quote
Old 19th June 2009, 08:52 PM   #6
lcsaszar is offline lcsaszar  Hungary
diyAudio Member
 
Join Date: Mar 2004
Location: Budapest, Hungary
Well, I always believed that a sound pressure peak (like that caused by hitting a bass drum) at the recording studio should cause a sound pressure peak (as caused by the outward movement of the loudspeaker diaphragm), at least at low frequencies. The phase shift of crossovers makes this nonsense at higher frequency. Is the absolute phase detectable by the human ear or not - this is another question, but IMHO absolute phase does exist up to the loudspeaker terminal. The reference is the signal at the microphone terminal (speaking about a single omni mic). A pressure increase induces positive voltage at the hot terminal.
  Reply With Quote
Old 19th June 2009, 09:15 PM   #7
Guido Tent is offline Guido Tent  Netherlands
diyAudio Member
 
Join Date: Dec 2001
Location: Eindhoven
Quote:
Originally posted by oshifis
Well, I always believed that a sound pressure peak (like that caused by hitting a bass drum) at the recording studio should cause a sound pressure peak (as caused by the outward movement of the loudspeaker diaphragm), at least at low frequencies. The phase shift of crossovers makes this nonsense at higher frequency. Is the absolute phase detectable by the human ear or not - this is another question, but IMHO absolute phase does exist up to the loudspeaker terminal. The reference is the signal at the microphone terminal (speaking about a single omni mic). A pressure increase induces positive voltage at the hot terminal.

SPL is independent of polarity
__________________
Guido Tent
www.Tentlabs.com
  Reply With Quote
Old 20th June 2009, 06:28 PM   #8
lcsaszar is offline lcsaszar  Hungary
diyAudio Member
 
Join Date: Mar 2004
Location: Budapest, Hungary
Sure. Just swap the hot and GND (red and black) wires of the left speaker cable, leave the right unchanged. You'll be surprised
  Reply With Quote
Old 20th June 2009, 06:57 PM   #9
Guido Tent is offline Guido Tent  Netherlands
diyAudio Member
 
Join Date: Dec 2001
Location: Eindhoven
Quote:
Originally posted by oshifis
Sure. Just swap the hot and GND (red and black) wires of the left speaker cable, leave the right unchanged. You'll be surprised

I do not deny the presence of differences in perceived sound when doing so, but please consider that one never knows if overall polarity is "correct" when connecting black to black and red to red. Polarity changes throughout many components.

And then, still, many multimike recordings make a mess out of polarity

so, "absolute" polarity does not exist
__________________
Guido Tent
www.Tentlabs.com
  Reply With Quote
Old 20th June 2009, 07:32 PM   #10
lcsaszar is offline lcsaszar  Hungary
diyAudio Member
 
Join Date: Mar 2004
Location: Budapest, Hungary
You are absolutely right, I must have misunderstood you, sorry for that. I meant absolute polarity does exist in theory, it could be realized in practice, but as you said many factors make it difficult to reach. A good example is a mixing console: nobody knows how many inverting stages are in series in the signal path.

BTW, on the recording side, is there any standard that dictates preserving absolute polarity during the recording process? I mean if the sound pressure increases in the studio (causing positive voltage at the microphone terminals), the binary word increases on the compact disc (causing positive voltage at the output of a noninverting I/V stage), or the groove goes up on the LP (causing positive voltage on the pickup terminals).
  Reply With Quote

Reply


PCM 1702 I/V StageHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
BB PCM 1702 vs 1704 A 8 Digital Line Level 34 5th February 2017 11:41 AM
BB 1702 DAC + transformer I/V ? inertial Tubes / Valves 5 11th February 2009 12:46 PM
Help needed to find PVM 1702 Alexiss Digital Source 9 19th August 2006 08:03 PM
my new diy toy. PCM 1702. tube-lover Digital Source 6 3rd July 2006 12:17 PM
Four BB pcm 1702 Stones Swap Meet 5 30th May 2005 08:31 PM


New To Site? Need Help?

All times are GMT. The time now is 01:55 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki