Behringer DEQ2496 Schematic

Claus · 29th January 2009, 04:59 AM

Is there a Behringer DEQ2496 Schematic out there? I would be very grateful for a copy.

Claus

rossl · 30th January 2009, 12:12 AM

If you find one, I would like a copy too.

Pano · 30th January 2009, 03:38 AM

Ditto! I don't thing Behringer lets these out.

sendler · 31st January 2009, 11:32 AM

There is a DCX schematic at the Yahoo group for the DCX. The power supply is the same. Same clocks, dac chips, analog cicuits, ect. It's not complete for a DEQ but much of it applies so it is better than nothing.
http://tech.groups.yahoo.com/group/DCX2496/

Claus · 2nd February 2009, 06:20 PM

I have the DCX schematic already. But I would like a copy of a schematic for my DEQ. I have searched the net. But had no luck.

Claus

shanyau · 15th March 2009, 09:32 AM

I want spdif (75 ohm) digital out from the DEQ2496,
how can I do that?

I have seen there is a little transformer before the AES socket, is it 75 ohm to 110 ohm transformer so I can just bypass the signal directly to the AES and has 75 ohm from the AES socket?

gp4Jesus · 2nd April 2010, 02:52 AM

Would anyone like to take a stab at why my DEQ blows fuses? I guess PS. Hope to get time w/a DVOM this weekend. a PS schematic would help

merlin el mago · 2nd April 2010, 08:21 AM

Also if somebody get the schematics I want a copy.

gphoton · 12th May 2010, 11:53 PM

For the poster looking for SPDIF out on the DEQ2496, my approach would be to convert the optical TOSLINK to RCA with a <$20 adapter

for example:
For only $9.77 each when QTY 50+ purchased - Optical Toslink to Coaxial (RCA) Digital Audio Converter | Toslink Switch / Converter

Disclaimer: I do not work for Monoprice etc...

I don't use this particular adapter, but I use its brother the RCA to TOSLINK version without issue. I use it with a passive 3-way TOSLINK switch to chose between sources into my DEQ2496.

opc · 30th June 2010, 01:47 AM

I know this is an older thread, but if anyone got their hands on a schematic, I'd love to have it.

For the fellow above asking about coax (75 ohm) SPDIF output, just make yourself a simple adapter cable. Go from pin 2 XLR to center pin RCA, and pin 3 XLR to the body of the RCA. I made a cable like that, and it works like a charm with my Buffalo II which takes 75 ohm coax SPDIF.

Cheers,
Owen

29th January 2009, 04:59 AM	#1
Claus diyAudio Member Join Date: Feb 2001 Location: Denmark / Germany	Behringer DEQ2496 Schematic Is there a Behringer DEQ2496 Schematic out there? I would be very grateful for a copy. Claus

31st January 2009, 11:32 AM	#4
sendler diyAudio Member Join Date: Aug 2004 Location: ny	DCX schematic at Yahoogroups/DCX There is a DCX schematic at the Yahoo group for the DCX. The power supply is the same. Same clocks, dac chips, analog cicuits, ect. It's not complete for a DEQ but much of it applies so it is better than nothing. http://tech.groups.yahoo.com/group/DCX2496/ __________________ Scott

12th May 2010, 11:53 PM	#9
gphoton diyAudio Member Join Date: Oct 2009	for SPDIF out there are optical to RCA adapters For the poster looking for SPDIF out on the DEQ2496, my approach would be to convert the optical TOSLINK to RCA with a <$20 adapter for example: For only $9.77 each when QTY 50+ purchased - Optical Toslink to Coaxial (RCA) Digital Audio Converter \| Toslink Switch / Converter Disclaimer: I do not work for Monoprice etc... I don't use this particular adapter, but I use its brother the RCA to TOSLINK version without issue. I use it with a passive 3-way TOSLINK switch to chose between sources into my DEQ2496.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modify behringer DEQ2496?	Rapid	Digital Line Level	212	20th July 2012 08:18 AM
FS:Behringer DEQ2496	Ryssen	Swap Meet	15	16th April 2009 08:24 PM
Behringer DEQ2496//Non-Delay ModHELP	syntaxsinner	Digital Line Level	5	26th April 2006 03:27 PM
FS: Behringer DEQ2496 UltraCurve Pro	Rescue Toaster	Swap Meet	3	4th February 2006 01:38 AM
Behringer DEQ2496 into T Amp?	joesan	Digital Source	7	19th October 2005 10:30 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th January 2009, 12:12 AM	#2
rossl diyAudio Member Join Date: Nov 2004 Location: Central Ohio	If you find one, I would like a copy too.

30th January 2009, 03:38 AM	#3
Pano diyAudio Moderator Join Date: Oct 2004 Location: North Carolina Blog Entries: 4	Ditto! I don't thing Behringer lets these out.

2nd February 2009, 06:20 PM	#5
Claus diyAudio Member Join Date: Feb 2001 Location: Denmark / Germany	I have the DCX schematic already. But I would like a copy of a schematic for my DEQ. I have searched the net. But had no luck. Claus

15th March 2009, 09:32 AM	#6
shanyau diyAudio Member Join Date: Mar 2008	I want spdif (75 ohm) digital out from the DEQ2496, how can I do that? I have seen there is a little transformer before the AES socket, is it 75 ohm to 110 ohm transformer so I can just bypass the signal directly to the AES and has 75 ohm from the AES socket?

2nd April 2010, 02:52 AM	#7
gp4Jesus diyAudio Member Join Date: Jan 2006 Location: Crawford, Georgia, US	Would anyone like to take a stab at why my DEQ blows fuses? I guess PS. Hope to get time w/a DVOM this weekend. a PS schematic would help

2nd April 2010, 08:21 AM	#8
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Also if somebody get the schematics I want a copy.

30th June 2010, 01:47 AM	#10
opc diyAudio Member Join Date: Oct 2004 Location: Ottawa, Ontario, Canada	I know this is an older thread, but if anyone got their hands on a schematic, I'd love to have it. For the fellow above asking about coax (75 ohm) SPDIF output, just make yourself a simple adapter cable. Go from pin 2 XLR to center pin RCA, and pin 3 XLR to the body of the RCA. I made a cable like that, and it works like a charm with my Buffalo II which takes 75 ohm coax SPDIF. Cheers, Owen

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read