diyAudio (
-   Digital Line Level (
-   -   Behringer DEQ2496 Schematic (

Claus 29th January 2009 04:59 AM

Behringer DEQ2496 Schematic
Is there a Behringer DEQ2496 Schematic out there? I would be very grateful for a copy.


rossl 30th January 2009 12:12 AM

If you find one, I would like a copy too.

Pano 30th January 2009 03:38 AM

Ditto! I don't thing Behringer lets these out.

sendler 31st January 2009 11:32 AM

DCX schematic at Yahoogroups/DCX
There is a DCX schematic at the Yahoo group for the DCX. The power supply is the same. Same clocks, dac chips, analog cicuits, ect. It's not complete for a DEQ but much of it applies so it is better than nothing.

Claus 2nd February 2009 06:20 PM

I have the DCX schematic already. But I would like a copy of a schematic for my DEQ. I have searched the net. But had no luck.


shanyau 15th March 2009 09:32 AM

I want spdif (75 ohm) digital out from the DEQ2496,
how can I do that?

I have seen there is a little transformer before the AES socket, is it 75 ohm to 110 ohm transformer so I can just bypass the signal directly to the AES and has 75 ohm from the AES socket?

gp4Jesus 2nd April 2010 02:52 AM

Would anyone like to take a stab at why my DEQ blows fuses? I guess PS. Hope to get time w/a DVOM this weekend. a PS schematic would help

merlin el mago 2nd April 2010 08:21 AM

Also if somebody get the schematics I want a copy.

gphoton 12th May 2010 11:53 PM

for SPDIF out there are optical to RCA adapters
For the poster looking for SPDIF out on the DEQ2496, my approach would be to convert the optical TOSLINK to RCA with a <$20 adapter

for example:
For only $9.77 each when QTY 50+ purchased - Optical Toslink to Coaxial (RCA) Digital Audio Converter | Toslink Switch / Converter

Disclaimer: I do not work for Monoprice etc...

I don't use this particular adapter, but I use its brother the RCA to TOSLINK version without issue. I use it with a passive 3-way TOSLINK switch to chose between sources into my DEQ2496.

opc 30th June 2010 01:47 AM

I know this is an older thread, but if anyone got their hands on a schematic, I'd love to have it.

For the fellow above asking about coax (75 ohm) SPDIF output, just make yourself a simple adapter cable. Go from pin 2 XLR to center pin RCA, and pin 3 XLR to the body of the RCA. I made a cable like that, and it works like a charm with my Buffalo II which takes 75 ohm coax SPDIF.


All times are GMT. The time now is 04:31 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio