Need pics of DAC in Behringer SRC2496 for troubleshoot

data · 1st December 2008, 05:32 AM

Need some help from fellow members.

I replaced the AK4393 in my SRC2496 and didn't take enough notes before hand and now have to troubleshoot a non working unit

What I need is pictures of the DAC on the underside of the PCB so I can see if I have it connected correctly.

mostly the legs/pins on the output side of the DAC......Pins 15 to 28

I need to check the area around the rectifier diodes on the underside also as I just get a fully lit front panel it when powered up

Need these pics desperately guys

data · 1st December 2008, 08:31 AM

Doesn't matter guys.........this is beyond my skill level

Lesson learned = "know your limits"

I have some cryogenic treated transformers one the way for this project, so I had better bin this one and start over

This time I had better just be happy to utilize the installed AK4393

data · 2nd December 2008, 12:28 AM

What would be of help would be the name of a Tech' in Brisbane that could do some fine soldering work for me, naturally I would pay him

So anyone know of a good electronics Tech in Brisbane?

1st December 2008, 05:32 AM	#1
data Account disabled at member's request Join Date: Jul 2007 Location: Brisbane	Need pics of DAC in Behringer SRC2496 for troubleshoot Need some help from fellow members. I replaced the AK4393 in my SRC2496 and didn't take enough notes before hand and now have to troubleshoot a non working unit What I need is pictures of the DAC on the underside of the PCB so I can see if I have it connected correctly. mostly the legs/pins on the output side of the DAC......Pins 15 to 28 I need to check the area around the rectifier diodes on the underside also as I just get a fully lit front panel it when powered up Need these pics desperately guys

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Behringer SRC2496 mods	Cobra2	Digital Line Level	124	10th May 2013 05:20 PM
Behringer SRC2496 A/D D/A with THS4032	seeyou	Digital Line Level	13	2nd January 2010 03:19 AM
Behringer SRC2496 into DCX2496	giulio	Digital Line Level	1	15th December 2006 11:15 AM
WTB: Behringer SRC2496	tf1216	Swap Meet	10	8th March 2006 11:23 AM
Behringer SRC2496	Spearmint	Digital Line Level	10	19th September 2004 02:03 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st December 2008, 08:31 AM	#2
data Account disabled at member's request Join Date: Jul 2007 Location: Brisbane	Doesn't matter guys.........this is beyond my skill level Lesson learned = "know your limits" I have some cryogenic treated transformers one the way for this project, so I had better bin this one and start over This time I had better just be happy to utilize the installed AK4393

2nd December 2008, 12:28 AM	#3
data Account disabled at member's request Join Date: Jul 2007 Location: Brisbane	What would be of help would be the name of a Tech' in Brisbane that could do some fine soldering work for me, naturally I would pay him So anyone know of a good electronics Tech in Brisbane?