diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Line Level (http://www.diyaudio.com/forums/digital-line-level/)
-   -   Help with Behringer DCX2496 (http://www.diyaudio.com/forums/digital-line-level/124311-help-behringer-dcx2496.html)

tommycomm 4th June 2008 07:01 PM

Help with Behringer DCX2496
 
Hi, i was hoping someone on this forum can help me with my problem i have the dcx946 & have connected 3amps to it. I only have my mixer plugged into Input A&B C is empty.

I have 3 amps plugged into it, i get sound from all out the outputs & have them set correct A-B A-B A-B but cant get no sound out of input 6.

I changed the cable, tried putting the speaker into a different output & it works fine so im unsure if output 6 is faulty?

Ive connected it to the laptop with the software & had a deeper look but no joy & all channels are unmuted.

Has anybody else had this problem, hope you can help.

Thanks. Tommy

flexus 4th June 2008 07:33 PM

hi
im not really dcx user but you have maybe chosen to use input c as mic preamp. ...only something read from the manual, but maybe it helps you. (setup->auto align off).
maybe someone else has another suggestion
greets


All times are GMT. The time now is 04:17 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2