PCB design for TDA1541 - noob needing tips - diyAudio
Go Back   Home > Forums > Source & Line > Digital Line Level

Digital Line Level DACs, Digital Crossovers, Equalizers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd May 2008, 10:06 AM   #1
diyAudio Member
 
Join Date: Sep 2006
Default PCB design for TDA1541 - noob needing tips

So... I'm not very good at either electronics- or PCB design, but I do a little diy on a very amateur level. Self taught.

To avoid using a breadboard I thought I could make a simple PCB for myself. It's for a TDA1541A NOS dac. The schematic is the standard one with 100nF decoupling and 470pF for the oscillator. Regs are meant to be shunt, so there's no need for caps on input or output. The cirquit on the left is something proposed in another thread here on diyaudio, for slowing down the clock signal. Silk screen is not important, as I won't be using it anyway.

The pic shows a photoview from top, with the dark traces x-rayed through from the bottom layer. The light green is the ground plane on top layer.

I was looking for comments and suggestions for improving the PCB.
Attached Images
File Type: gif tda1541abrd.gif (25.2 KB, 205 views)
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Noob needing sub for gigs. mrbobian Subwoofers 20 7th May 2008 09:57 AM
proaudio dipole, tips/design? thadman Multi-Way 2 19th April 2007 11:15 AM
Newbie Needing Project Design Advice cwoodall Everything Else 1 23rd August 2005 04:27 AM
Noob - Needing help deciding what Gainclone design to use tsnyder41 Chip Amps 5 19th May 2003 11:54 PM


New To Site? Need Help?

All times are GMT. The time now is 10:25 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2