• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

CSS V series ML-TL with tweeter options

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
An externally hosted image should be here but it was not working when we last tested it.

We are pleased to announce the CSS V series ML-TL speaker kits.
With the V series ML-TL there are 2 different tweeter options for those who would like to build the V series ML-TL.
The first option is the LD22C tweeter for those wanting to use the NEW soft dome low distortion tweeter from CSS.
Next option is the RT2 Ribbon tweeter for those wanting to use a ribbon tweeter .
More info to follow soon.
Here is all the cabinet information for those who have asked for the MLTL using the VWR drivers. You can start building your cabinets in anticipation of the kit releases.
Thanks to Jason for his fine artwork!!


Side view.
An externally hosted image should be here but it was not working when we last tested it.


4 X 8 cut sheet
An externally hosted image should be here but it was not working when we last tested it.


5 x 5 cut sheet
An externally hosted image should be here but it was not working when we last tested it.


Cut parts list
An externally hosted image should be here but it was not working when we last tested it.


Construction view
An externally hosted image should be here but it was not working when we last tested it.


Front panel large driver cut outs NOT on baffle
An externally hosted image should be here but it was not working when we last tested it.


Slot port cut out
An externally hosted image should be here but it was not working when we last tested it.


Binding plate cut out OPTIONAL kit includes binding posts
An externally hosted image should be here but it was not working when we last tested it.


Brace information
An externally hosted image should be here but it was not working when we last tested it.


Baffle information LD22 tweeter
An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.


Baffle information RT2 ribbon tweeter
An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.
 
Last edited by a moderator:
An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


Just a little different views ;)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.